The MC 550/650 Curb Machines are the bread and butter of all the models we make. They are very versatile curb machines that are designed to handle everything from extruding curb in a parking lot, trench curb, barn curb or curbing along a city street, county road or highway. The only difference between the 2 models is the 550 has a 13 HP Honda recoil start engine and the 650 has a 13 HP Honda electric start engine.
Specifications
|
MC550 |
MC650 |
MC850 |
MC900 |
|
|
Operating Weight |
668 lb. |
718 lb. |
918 lb. |
959 lb. |
|
Height (Steering handle down) |
38″ |
38″ |
40.5″ |
|
|
Width |
32.25″ |
32.25″ |
32.25″ |
|
|
Length with Form (steering handle up) |
77.5″ |
77.5″ |
91.5″ |
|
|
Wheelbase |
52.75″ |
52.75″ |
71″ |
|
|
Hopper Capacity |
6.1 cubic feet |
6.1 cubic feet |
9.0 cubic feet |
|
|
Standard Tire Configuration |
(9) 8″ dia. x 2″ solid rubber |
(9) 8″ dia. x 2″ solid rubber |
(4) 4.10 x 3.50 pneumatic front + (3) 8″ dia. x 2.5″ solid rubber rear |
|
|
Engines |
13 HP Honda 14 HP Kohler |
20.3 HP Honda |
20.3 HP Honda |
|
|
Engine Starting System |
Recoil |
Electric |
Electric |
Electric |
|
Fuel Capacity |
1.6 gal. |
2.3 gal. |
3.3 gal. |
|
|
Standard Auger Configuration |
(2) cast 6″ dia. x 9″ lg. |
(2) cast 6″ dia. x 9″ lg. |
(3) cast 6″ dia. x 9″ lg. |
|
|
Optional Auger Configurations |
(2) cast 5″ dia. x 9″ lg. (1) welded 8″ dia. x 18″ lg. |
(2) cast 5″ dia. x 9″ lg. (1) welded 8″ dia. x 18″ lg. (1) welded 10″ dia. x 18″ lg. |
(3) cast 5″ dia. x 9″ lg. (3) welded 8″ dia. x 18″ lg. (3) welded 10″ dia. x 18″ lg. |
|
|
Hollow Auger Shaft (to extrude rebar) |
Optional |
Optional |
Not available |
|
|
Drive System |
Automatic centrifugal clutch to enclosed 8:1 gear reducer; final auger drive chain & sprocket Extrusion process provides self-propulsion |
|||
|
Steering |
Tie rod with 40″ steering handle |
|||
|
Brake |
Friction pad on steering handle |
|||
|
OTHER AVAILABLE MODELS: MC655 Same as MC650, but with modified frame allowing extrusion under existing guardrail. MC750 Same as MC650, but with two continuously turning auger assemblies, one mounted on the left and one on the right, allowing immediate changeover from right to left hand extrusion. |
||||