Put big digging power in restricted areas and congested work sites with a C Series compact excavator from New Holland. The dozer blade and auxiliary hydraulics are standard equipment to improve your bottom line.
- ENGINE - Cylinders: 3
- DRIVETRAIN - Gradeability: 30° (58%)
- DRIVETRAIN - Travel speeds - 1st: 1.6 mph (2.5 kph)
- DIMENSIONS - Boom swing: 75° left/50° right
- DIMENSIONS - Tail swing overhang: 0 ft 0 in (0 mm)
- SERVICE CAPACITIES - Engine oil w/ filter change: 1.8 gal (6.7 L)
- DIMENSIONS - Track overall length: 7 ft 0 in (2130 mm)
- DIMENSIONS - Overall transport length: 15 ft 9 in (4790 mm)
- DRIVETRAIN - Ground pressure: ROPS - N/A / CAB - 4.83 psi
- DIMENSIONS - Upper structure ground clearance: 1 ft 9 in (540 mm)
- BLADE SPECS - Backfill blade rise above ground: 1 ft 3 in (375 mm)
- DIMENSIONS - Center to center – idler to sprocket: 5 ft 7 in (1700 mm)
- PERFORMANCE SPECS - Dig radius at groundline: 17 ft 1 in (5200 mm)
- ENGINE - Model: Yanmar 3TNV88F-ESHYB
- DIMENSIONS - Track shoe width: 12 in (300 mm)
- SERVICE CAPACITIES - Hydraulic tank - Total system: 15.9 gal (60 L)
- ENGINE - Gross horsepower – SAE J1995: 24.4 hp (18.2 kW) @2200 RPM
- ENGINE - Fuel injection: Mechanical with electronic governor
- PERFORMANCE SPECS - Vertical straight wall dig depth: 7 ft 2 in (2190 mm)
- PERFORMANCE SPECS - Maximum dig depth: 10 ft 3 in (3135 mm)
- ENGINE - Emissions Certification: Tier 4 Final
- DRIVETRAIN - Travel speeds - 2nd: 2.6 mph (4.2 kph)
- DIMENSIONS - Tail swing radius: 2 ft 10 in (870 mm)
- SERVICE CAPACITIES - Radiator: 1.5 gal (5.5 L)
- DIMENSIONS - Track overall width: 5 ft 9 in (1740 mm)
- PERFORMANCE SPECS - Maximum dig radius: 17 ft 5 in (5315 mm)
- SERVICE CAPACITIES - Hydraulic tank - Refill capacity: 9.8 gal (37 L)
- ENGINE - Cooling: Water-cooled
- BLADE SPECS - Backfill blade height: 1 ft 3 in (370 mm)
- ENGINE - Displacement: 100.2 in³ (1642 cc)
- DIMENSIONS - Arm (standard length): 4 ft 3 in (1.3 m)
- DIMENSIONS - Minimum ground clearance: 11 in (290 mm)
- DIMENSIONS - Overall height: 8 ft 2 in (2500 mm)
- DIMENSIONS - Operating weight: Canopy: 7,990 lb (3625 kg) / Cab: 8,300 lb (3765 kg)
- ENGINE - Fuel: Diesel
- BLADE SPECS - Backfill blade dig depth: 1 ft 3 in (390 mm)
- SERVICE CAPACITIES - Fuel tank: 10.5 gal (40 L)
- OPERATOR STATION - Operator Station: ROPS with 4-post canopy or Enclosed Cab
- DRIVETRAIN - Maximum traction force: 6,835 lbf (30.4 kN)
- More selection, more power With seven models from 1.7 to 6 tons, there’s nothing small about the performance of New Holland compact excavators. All models offer an increase in horsepower compared to previous models, powered by quiet, fuel-efficient Tier 4 Final engines up to 66.9 horsepower.
- Big power in restricted spaces C Series excavators deliver big digging and grading performance with SAE bucket breakout forces up to 8,490 lbf and dig depth up to 12.5 feet. Their compact design and zero/short tail swing mean you can dig, fill and grade in the most confined, congested areas. You can offset the excavator boom left or right within the operating range to match the situation. The C Series also offers more ground clearance and excellent dozer blade lift height for maneuvering and working in tough conditions.
- Comfortable operation Ease and comfort equate with operator productivity, so the wide C Series cab is designed for spaciousness, all-around visibility, comfortable seating and smooth control. New Holland’s Auto Shift traveling system automatically downshifts when load increases to enhance travel torque on slopes and in difficult conditions, then shifts back up to secure a faster travel speed after the load decreases. The Auto Idle system activates when you are not using the operating levers to improve fuel efficiency.