GT3600 SLIPFORM PAVER

OPTIONAL XTREME PACKAGE FOR GT-3600

• Xtreme Steering Capabilities ‒ The Xtreme GT-3600 is equipped with rotary-sensored slew drives, on each of the three tracks for extreme steering ability.

– The Xtreme GT-3600’s sensored All-Track Steering and sensored All-Track Positioning, make it the ultimate, intelligent slipform paver.

– The intelligent All-Track Positioning on the Xtreme GT-3600 includes a smart hydraulic cylinder on all three legs. The smart cylinders allow G+® to know the position of all three tracks and can make steering adjustments as needed.

• Xtreme Intelligence ‒ Smart cylinder sideshifting of the mold for repeatable mold offset.

– Intelligent off set is accomplished with a smart hydraulic cylinder for telescoping the mold mounting system. This provides G+ the ability for repeatable mold offset. The trimmerhead and mold have independent vertical adjustments for raising and lowering.

• Xtreme Hydraulic Package ‒ Independent hydraulic travel control to each track allow G+ to control each individual track speed through a radius.

• Xtreme Radius ‒ The Xtreme GT-3600 can pour a 24 inch (610 mm) radius.

– The Xtreme GT-3600’s G+ control system easily interfaces with stringline or a 3D guidance system for curb and gutter and tight radius applications.

– The Xtreme GT-3600 features the GOMACO three-sensor radius system for stringline. When paving with stringline, the lead steering wand is allowed to leave the stringline and reference is switched to sensor number two for traveling around the tight radius.

– Individual track speed control provides smooth machine travel around a radius.

• G+ Radius Software ‒ Pick your radius and G+ calibrates and manages all aspects of traveling around it on stringline, including track angles and individual variable track speeds.

– The G+ radius software for the control system allows the operator to program the size of the radius into the controller. As the Xtreme GT-3600 approaches the radius, with the values already dialed in, the operator activates the radius program, and the curb and gutter machine slipforms around the radius. It’s now easy for any operator to pour a radius.

FEATURES

• The operator’s platform is isolated to reduce vibration for a comfortable day of paving.

• Excellent fuel efficiency combined with an increased fuel capacity allows for an uninterrupted day of paving on the project.

• An optimized cooling package with a hydraulic fan controlled by G+ adapts the cooling needs to job-site conditions for both a quiet and efficient operation.

• The G+ wireless remote control is an option available for the Xtreme GT-3600. The G+ remote control allows the operator to work from the operator’s platform or the ability to move around the machine with hands-on control at all times.

• The GOMACO Xtreme GT-3600 is also available with the optional GOMACO Remote Diagnostics (GRD) for machine troubleshooting, diagnostic reviews, software updates, and more.

• Designed for high-volume curb and gutter.

OPTIONS

• Xtreme Package.

• Barrier/parapet sidemount attachment. Maximum slipforming height of 50 in. (1270 mm).

• Auger provides fast and efficient concrete delivery.

• Guillotine-style curb depressor has a straight blade that enters the face of the curb. Hydraulically powered, for use on curb and gutter molds while slipforming through driveways. Can be changed to other molds if they are slotted and clamped to accept the driveway cutout.

• California-style curb depressor has a curved blade that enters the face of the curb. Hydraulically powered, for use on curb and gutter molds while slipforming through driveways.

• Hydraulic pressure-compensated sideplates.

• Additional vibrators and mounts.

• Up to four additional vibrator circuits and controls.

• Left-hand discharge trimmerhead.

• Trimmerhead insert sections of 12 in. (305 mm), 18 in. (457 mm), 24 in. (610 mm), and 30 in. (762 mm) widths are available for trimmerhead width to 66 in. (1676 mm) maximum.

• Curb and gutter molds will be built to customer specifications.

• Various mold options are available.

• Mold centermount kit, includes drawbar to mount in place of trimmerhead and extension for the rear leg.

• High-pressure water system, includes trigger gun control and adjustable pressure unloader for up to 2000 psi.

• Polyurethane track pads, 81 pads required.

• Radius wheels for use on radius work, saving time on stringline set-up.

• 3D package for stringless guidance.

• Other options are available to customize the machine to accommodate applications and customer needs.

GT-3600 TRIMMER/SLIPFORM PAVER

• Hydraulically powered charging conveyor with hydraulic positioning for slide and tilt. New belt wiper provides better cleaning and longer wiper lifespan

• Power-Swing leg.

• Each track has 36 inches (914 mm) of hydraulic leg height adjustment and an additional manual adjustment of 8 inches (203 mm)

• Sideshifting trimmerhead with 48 inches (1219 mm) of hydraulic sideshift, 16 inches (406 mm) of hydraulic vertical adjustment.

• Vertical-lifting mold

• GOMACO’s Hook-and-Go system.

• Exclusive, independent adjustable stainless steel troweling section seals and provides the superior GOMACO finish.

• Telescoping operator’s platform for mold and hold-down.

• Four hydraulic vibrator circuits with individual variable controls and two hydraulic vibrators are standard.

• Power-Slide rear leg

• Exclusive “smart” steering cylinders, used for dependable steering control feedback for push-button steering setup and setting parameters.

• GBox on every leg to accommodate improved steering and grade with G+ controls.

• Operator’s platform provides easy access and ultimate operator visibility

• Emergency stop buttons are located at strategic areas around the machine

• GOMACO’s G+® control system.

• Telescoping leg.

FAST CONCRETE LOADING PROVIDES INCREASED PRODUCTION

Fast concrete loading provides high-production results. There are two conveyor systems to choose from with the GOMACO GT-3600, the standard belt conveyor and the auger. The standard conveyor for the GT-3600 is 15 feet (4.6 m) long, 24 inches (610 mm) wide, and has a belt speed variable up to 284 feet per minute (86.6 mpm). It is hydraulically powered and reversible with a charging hopper. The belt conveyor is pivot mounted with hydraulic lift and positioning. The mold is designed with extra concrete capacity, to allow slipforming through a tight radius without waiting for concrete delivery.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.