GLOBE TRAILERS – GTBN653-53-26-HGG – 65 TON LOWBOY
65-Ton, 3 Axle, Detachable Non-Ground Bearing, Lowboy Trailer This Specification is for a Model GTBN653-53-26-HGG, 65-Ton, 3 Axle, Detachable Non-Ground Bearing, Lowboy Trailer. Max Payload is 130,000 lbs in 12’ Load Concentration and a Shipping Weight of 23,000 lbs +/- 3%
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
- SPECIFICATIONS - Deck Height: 24"
- SPECIFICATIONS - Rear Deck: 14’ 8” (176”)
- SPECIFICATIONS - Wheels: 12 ea. 8.25 x 22.5, 10 hole hub piloted steel disc wheels.
- SPECIFICATIONS - Operating Pressure: Wet kit system requires 3000PSI at 10 GPM maximum flow to lift load at full capacity.
- SPECIFICATIONS - Electrical: 12-Volt electrical system with 7 way SAE connector, All lights LED mounted in rubber grommets to DOT standards.
- SPECIFICATIONS - Overall Length: 52’ 8” (632”)
- SPECIFICATIONS - Rear Tail Section: Open wheel with boom & bucket well, set up for 4th axle/stinger
- SPECIFICATIONS - 5th Wheel Height: 50”
- SPECIFICATIONS - Brakes: 16.5 x 7 air brakes w/ spring parking brake on middle axle Auto slack adjusters, & 2S1M ABS system on 2nd axle.
- SPECIFICATIONS - Load well Length: 26’ 0” (312”)
- SPECIFICATIONS - Ground Clearance: 8"
- SPECIFICATIONS - Decking: 1 3/4” apitong flooring, open center, secured to frame with 5/16” self-taping torque screws.
- SPECIFICATIONS - Cross Member: 10” Jr. “I” beams on 12” Centers
- SPECIFICATIONS - King Pin Setting: 16"
- SPECIFICATIONS - Finish: Powdercoated to color of choice.
- SPECIFICATIONS - Axle Spacing: 54"
- SPECIFICATIONS - Side Rails: 16” fabricated T-I “I” beam, 100,000 PSI.
- SPECIFICATIONS - Tires: 12 ea 275/70R x 22.5 “H” load range, steel belted radials.
- SPECIFICATIONS - King Pin: 2” heavy duty
- SPECIFICATIONS - Out Riggers: 30 ea removable outriggers with double up front and double in middle of load well, 15 ea Side.
- SPECIFICATIONS - Swing Clearance: 98"
- SPECIFICATIONS - Rear Tail: 14” fabricated T-1 “I” beam, 100,000 PSI.
- SPECIFICATIONS - Main Beam: 16” fabricated T-1 “I” beam, 100,000 PSI.
- SPECIFICATIONS - Front Ramps: 31” double hinged front loading flip ramps with grousers.
- SPECIFICATIONS - Hydraulics: Wet line hook-up on trailer for tractor PTO operation.
- SPECIFICATIONS - Overall Length : 8’ 6” (102”)
- SPECIFICATIONS - Gooseneck: 12’ 0” (144”)
- SPECIFICATIONS - Tie Downs: 16 ea “D” Ring tie downs 6 ea side on main deck, 2 on rear deck.
- SPECIFICATIONS - Suspension: 30K Cush air ride yoke mount suspension, 3rd axle air lift, with auto dump valve, & +/- 3 air ride adjustment.
- SPECIFICATIONS - Axles: Three (3) ea 25,000 lbs capacity axles, 3rd axle lift.