GLOBE SLIDING AXLE TRAILERS, 55 TON — 55SA710886

FEATURES AND BENEFITS

WINCH SYSTEM

Available options for 10-45K lb hydraulic winch system. Mounted front and center of the upper deck. Standard cable length of 85’ with shackle. Cable length options are available.

SLIDING AXLE

Will handle heavy loads with a super low angle while maintaining superior stability during loading and unloading.

HIGH QUALITY STEEL

Constructed with T-1 100K PSI yield strength Steel. The High Tensile Steel ensures the designed camber is retained, and allows for a longer product service life.

DECKING OPTIONS

• Oak: Standard

• Apitong: Best strength to weight ratios of natural woods.

• Rumber: Composite which is impervious to fluids, mud, oil and UV rays.

KEY HOLES FOR THE TIE DOWNS

Double slotted key holes gives you more tie-down angles for securing load.

HYDRAULIC CONTROLS

Controls located on the driver side of the upper deck.

STEMCO WHEEL WARRANTY

5-year wheel end warranty. Guardian wheel seals, Pro-Torq spindle nuts and Sentinel hub caps.

CONNECTIONS

The front side of the neck offers easy access for connections like hydraulics, electrical and air lines.

AIR BAGS

30,000 pound rated large diameter air bags are standard. This allows for lower operating pressure and higher capacity when needed.

STORAGE COMPARTMENT

Flush mounted compartments to store your loose items.

COLOR OPTIONS

Globe Trailers can powder coat to the color of your choice.

HEAD RACK OPTION

Optional detachable steel bulkhead, 48” high with optional work lights.

PONY MOTOR

Gasoline 27 HP Pony Motor provides hydraulic operation when disconnected from the trucks wet line. Unit is self contained under the neck.

WHEEL OPTIONS

All Globe trailers come with standard HUB piloted disc wheels. Wheels are also available in all Aluminum or Outer Aluminum.

LOADING AND RETRACTED AXLE POSITION

Loading Position: The axles travel forward and allow the deck to rise and allow for a very low 7.5 degree load position.

Transport Position: The axles are retracted to the rear of the trailer and locked into the transport position.

POWDER COATED

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.