Sullair two-stage tandem compressors use two sets of rotors arranged in an end-to-end design for unmatched full-load and part-load efficiency, and a two-year payback on energy savings compared to a single-stage compressor. Capacity is matched to system need for reduced cycle time and longer life. These units are 13% more efficient than single-stage screw compressors at full-load operation and 30% more efficient at part-load.
- Flow: 495 – 3000 cfm m³/min
- bar: 6.8 – 12 bar
- m³/min: 14.0 – 84.9 m³/min
- Power: 100 – 600 hp 75 – 447 kW
- Pressure: 100 – 175 psi bar
- Two-stage compressor air end
- Interstage cooling process
- Bearing fluid reservoirs
- Fiberglass fluid filter
- Easy maintenance to critical components
- Sullair Supervisor™ Controller
- Variable Capacity Control System featuring Spiral Valve Technology
- Multi-stage air-fluid separation
- Superior end-to-end rotor design
- Built-in fluid lid lifting device**
- NEMA 4 Wye Delta starter*
- Unparalleled energy efficiency
- Enhanced cooler serviceability
Information
Available models: TS-20—100 to 250 hp (75 to 186 kW), 500 to 1200 acfm (14.1 to 33.9 m3/min), 100 to 175 psig (6.8 to 12 bar) TS-32—200 to 350 hp (149 to 261 kW), 1105 to 1875 acfm (31.2 to 53.1 m3/min), 100 to 175 psig (6.8 to 12 bar) TS-32S—400 to 600 hp (298 to 447 kW), 1681 to 3000 acfm (47.6 to 84.9 m3/min), 100 to 150 psig (6.8 to 10.3 bar) V-200TS—100 to 200 hp (75 to 149 kW) Variable Speed Drive (VSD), 495 to 1000 acfm (14.0 to 28.3 m3/min), 100 to 175 psig (6.8 to 12 bar) V-320TS—200 to 450 hp (149 to 336 kW) Variable Speed Drive (VSD), 945 to 2310 acfm (26.7 to 65.4 m3/min), 100 to 150 psig (6.8 to 10.3 bar) Sullair air end life lengthened by superior bearing arrangement Unmatched energy efficiency and two-stage durability Choice of two long-life fluids Choice of air- or water-cooled