CA15D RHINO | Alta Equipment Company

DYNAPAC CA15D RHINO–SINGLE DRUM VIBRATORY ROLLERS

Dynapac has a complete range of compaction equipment products, from the very smallest to one of the world’s biggest.

STANDARD EQUIPMENT

• Back up alarm

• Battery switch (std)

• Brake release

• Cup and can holder

• Differential lock (limited slip)

• Drive control (right side)

• Drum drive, ECO mode

• Emergency stop

• Engine 55 kW (Stage IIIA/Tier3)

• Engine hood lockable

• Fuel level display

• High mounted exhaust pipe

• Horn

• Hour meter display

• Hydraulic checkpoints

• Hydraulic fluid filter “spin-on”

• Hydraulic fluid (mineral)

• Interlock, Key (starter)

• Lifting points

• Lifting points for jack

• Manuals (Operation & Maintenance)

• Manuals (Spare parts catalogue)

• Operator’s platform (rubber mounted)

• Operator’s station(fixed)

• Parking brake

• ROPS or cab

• Seat (adjustable)

• Seat belt 3″

• Storage box (on ROPS platform)

• Storage for laminated manuals

• Tie down points

• Vandal cover (instrument panel)

• Warning lights (brake, engine oil pressure, engine oil temperature, Engine diagnostics, low charge, low fuel level)

OPTIONAL EQUIPMENT

• Cab with AC

• seat belt 3″

• front ballast 200 kg

• shell pad kit

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

  • Hydraulic System - Parking/Emergency brake: Failsafe multidisc brake in rear axle and front drum motor.
  • Dimensions - Steering angle : ±33°
  • Dimensions - Width, front: 1870 mm
  • Compaction - Nominal amplitude (high/low): 1,7/0,8 mm
  • Traction - Speed range: 0-10 km/h
  • Dimensions - Turning radius, outside: 4580 mm
  • Dimensions - Wheelbase: 2200 mm
  • Dimensions - Drum width : 1680 mm
  • Engine - Fuel tank capacity: 117 l
  • Hydraulic System - Steering: Mechanical-hydraulic with steering valve supplying the steering cylinder. Steering angle is proportional to steering wheel
  • Dimensions - Curb clearance: 360 mm
  • Compaction - Emulsion tank:
  • Masses - Operating mass (incl. Cab): 6500 kg
  • Dimensions - Height, max.:
  • Masses - Module mass (front/rear): 3400/3100 kg
  • Engine - Manufacturer/Model: Kubota V3307-DI Stage IIIA/Tier 3
  • Engine - Rated power, SAE J1995: 55 kW (75 hp) @ 2,200 rpm
  • Hydraulic System - Vibration: Hydrostatic with a vibration pump supplying a motor connected to the eccentric axle generating the vibrations
  • Traction - Vertical oscillation: ±9°
  • Dimensions - Ground clearance : 360 mm
  • Compaction - Centrifugal force (high/low amplitude): 114/55 kN
  • Masses - Max. operating mass: 7200 kg
  • Engine - Electrical system: 12 V
  • Masses - Operating mass (incl. ROPS):
  • Compaction - Water tank volume:
  • Dimensions - Overhang, left: 95 mm
  • Dimensions - Height, with ROPS/cab :
  • Dimensions - Overhang, right: 95 mm
  • Traction - Tire size: (16 ply) 400/60-22.5 flotation
  • Dimensions - Drum diameter: 1220 mm
  • Hydraulic System - Service brake: Hydrostatic in forward and reverse lever.
  • Dimensions - Width, rear: 1530 mm
  • Hydraulic System - Driving: Hydrostatic with a traction pump supplying two parallel connected motors, one on rear axle and one on drum
  • Engine - Rated power, ISO 14396:
  • Traction - Max. theoretical gradeability: 56 %
  • Dimensions - Turning radius, inside: 2900 mm
  • Dimensions - Drum shell thickness: 22 mm
  • Compaction - Static linear load: 20 kg/cm
  • Engine - Type: Water cooled turbo Diesel
  • Dimensions - Length : 4510 mm
  • Compaction - Vibration frequency (high/low amplitude): 32/32 Hz