- General Specifications: Approximate Weight: 28,460 lbs.
- Hydraulics: Auxiliary Relief Pressure: 2,500 psi
- Load Chart: : 4,000 lbs.
- General Specifications: Recommended Tire Type: 14.00 x 24 G2 12-ply
- Load Chart: : 250 lbs.
- Components: Parking Brake: Spring-Applied, Hydraulic Release
- Components: Transmission: 4-Speed Power Shift
- Capacities: Lift Capacity: 11,000 lbs.
- Capacities: Maximum Forward Reach: 40'9"
- Components: Maximum Travel Speed : 22.8 mph
- General Specifications: Turning Radius: 12'2"
- General Specifications: Overall Height: 7'11"
- Load Chart: : 500 lbs.
- Capacities: Maximum Reach Below Grade: 2'10"
- Loader Performance: Breakout Force: N/A
- Hydraulics: Pump Type: Open-Center, Dual-Section
- General Specifications: Frame Leveling - Left/Right: 10°/10°
- Engine: Power : 120 hp
- Components: Selective Steering: 4-Wheel 2-Wheel Crab
- Engine: Aspiration: Turbocharged
- General Specifications: Ground Clearance: 16"
- Capacities: Capacity at Maximum Lift Height: 5,000/5,500 lbs.
- Load Chart: : 7,000 lbs.
- Load Chart: : 9,000 lbs.
- Engine: Model: 3.8L QSF Tier IV
- Engine: Manufacturer: Cummins
- Hydraulics: Main Relief Pressure : 3,000 psi
- Hydraulics: Total Capacity : 43 gpm
- General Specifications: Fuel Capacity: 30 gal.
- Load Chart: : 1,000 lbs.
- Engine: Rated Speed: 2,500 rpm
- General Specifications: Width: 8'3"
- Capacities: Capacity at Maximum Forward Reach: 2,000 lbs.
- General Specifications: Wheelbase: 10'8"
- General Specifications: Length - Less Forks: 20'10"
- Load Chart: : 5,000 lbs.
- Hydraulics: Hydraulic Reservoir Capacity : 45 gal.
- Load Chart: : 3,000 lbs.
- Capacities: Maximum Lift Height: 55'1"
- Components: Brakes: Oil-Immersed, Disc-type
- Two-wheel, four-wheel, crab steering standard.
- Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
- Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
- Standard centrifugal pre-cleaner and two-stage air cleaner.
- Easy access to hydraulic oil and transmission reservoirs.
- Hydraulic main control valve in back door.
- Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads
- Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
- Standard pneumatic tires.
- Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
- Exterior boom hose routings for easy access.
- Industry loading job site maneuverability with a 12' 2" turning radius.
- Transmission and hydraulics easily accessed through large hinged panel.
- 10-degree frame tilt in both directions.
- Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
- Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
- Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
- Double universal joints for tight turn radius without applying stress on the axle.
- Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.
- Lockable, two-piece cab door for security, communication and cross-ventilation.
- ROPS and FOPS certified operator's compartment.
- Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
- Rifled bushings in key areas