- Components: Maximum Travel Speed : 22.8 mph
- Capacities: Capacity at Maximum Lift Height: 10,000 lbs.
- Loader Performance: Total Degrees of Bucket Rotation: 132°
- Loader Performance: Maximum Dump Height at 45° Dump Angle: 30'9"
- Load Chart: : 6,000 lbs.
- General Specifications: Wheelbase: 10'8"
- General Specifications: Width: 8'3"
- General Specifications: Approximate Weight: 25,300 lbs.
- Capacities: Maximum Forward Reach: 26'4"
- Hydraulics: Main Relief Pressure : 3,000 psi
- Capacities: Maximum Lift Height: 40'4"
- General Specifications: Recommended Tire Type: 14.00 x 24 G2 12-ply
- Hydraulics: Auxiliary Relief Pressure: 2,500 psi
- Hydraulics: Total Capacity : 43 gpm
- General Specifications: Length - Less Forks: 19'4"
- Loader Performance: Maximum Forward Reach at Maximum Dump Height: 1'2"
- Components: Transmission: 4-Speed Power Shift
- Load Chart: : 8,000 lbs.
- Engine: Rated Speed: 2,500 rpm
- Components: Brakes: Oil-Immersed, Disc-type
- Loader Performance: Dump Angle at Maximum Dump Height: 24°
- Load Chart: : 3,000 lbs.
- Engine: Aspiration: Turbocharged
- General Specifications: Overall Height: 7'11"
- Loader Performance: Breakout Force: 14,000 lbf
- Capacities: Lift Capacity: 12,000 lbs.
- Loader Performance: Maximum Forward Reach at 45° Dump Angle: 11'10"
- Engine: Power : 120 hp
- General Specifications: Fuel Capacity: 30 gal.
- Components: Parking Brake: Spring-Applied, Hydraulic Release
- Capacities: Capacity at Maximum Forward Reach: 2,000 lbs.
- Engine: Manufacturer: Cummins
- Engine: Model: 3.8L QSF Tier IV
- General Specifications: Frame Leveling - Left/Right: 10°/10°
- Loader Performance: Maximum Loadover Height: 40'3"
- Hydraulics: Hydraulic Reservoir Capacity : 45 gal.
- General Specifications: Turning Radius: 12'2"
- Loader Performance: Rollback at Ground Level: 30°
- Load Chart: : 4,000 lbs.
- General Specifications: Ground Clearance: 16"
- Capacities: Maximum Reach Below Grade: 1'4"
- Hydraulics: Pump Type: Open-Center, Dual-Section
- Loader Performance: Maximum Dump Height: 39'0"
- Components: Selective Steering: 4-Wheel 2-Wheel Crab
- Exterior boom hose routings for easy access.
- Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
- Transmission and hydraulics easily accessed through large hinged panel.
- Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
- ROPS and FOPS certified operator's compartment.
- Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads
- Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
- Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
- Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.
- Rifled bushings in key areas
- Hydraulic main control valve in back door.
- Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
- Industry loading job site maneuverability with a 12' 2" turning radius.
- Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
- Double universal joints for tight turn radius without applying stress on the axle.
- Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
- Easy access to hydraulic oil and transmission reservoirs.
- Standard centrifugal pre-cleaner and two-stage air cleaner.
- 10-degree frame tilt in both directions.
- Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
- Lockable, two-piece cab door for security, communication and cross-ventilation.
- Two-wheel, four-wheel, crab steering standard.
- Standard pneumatic tires.