RS6-34 GEN:3
Gehl: Aerial
Specifications
| Capacities: Capacity at Maximum Forward Reach: | 900 lbs. |
| Capacities: Capacity at Maximum Lift Height: | 4,000 lbs. |
| Capacities: Lift Capacity: | 6,000 lbs. |
| Capacities: Maximum Forward Reach: | 23'3" |
| Capacities: Maximum Lift Height: | 34'3" |
| Capacities: Maximum Reach Below Grade: | 24" |
| Components: Axle Manufacturer: | Dana |
| Components: Brakes: | 4-Wheel Hydraulically Actuated Internal Wet-Disc Brake |
| Components: Maximum Travel Speed: | 18 mph |
| Components: Parking Brake: | Spring-Applied, Hydraulic Release (SAHR) on Front Axle |
| Components: Selective Steering: | 4-Wheel 2-Wheel Crab |
| Components: Transmission: | Dana 3-speed Powershift |
| Engine: Aspiration: | Turbocharged |
| Engine: Manufacturer: | Deutz |
| Engine: Model: | TD 3.6 Tier IV |
| Engine: Power : | 74 hp |
| Engine: Rated Speed: | 2,300 rpm |
| General Specifications: Approximate Weight: | 15,100 lbs. |
| General Specifications: Frame Leveling: | 10° |
| General Specifications: Fuel Capacity: | 29 gal. |
| General Specifications: Ground Clearance: | 14" |
| General Specifications: Length - Less Forks: | 16'0" |
| General Specifications: Turning Radius: | 12'6" |
| General Specifications: Wheelbase: | 9'2" |
| General Specifications: Width: | 7'10" |
| Hydraulics: Hydraulic Reservoir Capacity : | 35 gal. |
| Hydraulics: Pump Type: | Gear |
| Hydraulics: System Pressure : | 3,000 psi |
| Hydraulics: Total Capacity : | 29 gpm |
| Load Chart: : | 1,000 lbs. |
| Load Chart: : | 1,500 lbs. |
| Load Chart: : | 2,000 lbs. |
| Load Chart: : | 5,000 lbs. |
| Load Chart: : | 3,000 lbs. |
- Shorter hoses from main valve to boom provide compact hose routing, enhancing serviceability.
- Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair.
- Side and rear glass is standard equipment.
- Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
- Auto-leveling feature keeps loads level when raising/lowering the boom.
- Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
- Welded box-section boom design for maximum load placement ability.
- Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
- Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
- Dana three-speed power-shift transmission is easy to maintain.
- Internal wet disc brakes provide excellent braking and long life.
- Dual-function, pilot-assisted joystick is standard equipment.
- Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
- Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
- Side-mounted fuel tank with battery access and an additional storage compartment.
- 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment.
- Well-thought-out cylinder design provides one of the fastest cycle times in the industry.
- Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.
- ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.
- Virtually 360-degree visibility increases safety and operating accuracy.
- Optional tri-function, pilot-assisted joystick allows the operator to set forktilt and auxiliary function speeds.
RS6-34 Parts Manual PDF, 5.17 MB
More information available
