Discbine® 209/210 Side-Pull Disc Mower-Conditioners

New Holland: Agriculture

Print Email
Learn more about our Operator Demo!

Learn More
Contact Us Today
  • HIGH QUALITY AND FAST DRYDOWN: Choose the best conditioning system for your crops – rubber chevron rolls, steel chevron rolls or advanced LeaningEdge™ flail tines.
  • QUICKMAX™ BLADE CHANGE SYSTEM IS STANDARD EQUIPMENT: The QuickMax™ knife change system makes it easy to keep knives sharp for the close, clean cut you want and increased tonnage.
  • FAST, SMOOTH CUTTING: The maneuverable 9’2” Discbine® 209 and the 10’4” Disbine® 210 make high-quality hay with the smooth, trouble-free performance you expect from a genuine Discbine.
  • MOWMAX™ DISC CUTTERBAR 3-YEAR FACTORY WARRANTY: New Holland’s MowMax™ disc cutterbar breezes through tough mowing conditions and is backed by three full years of factory warranty so you can cut close with confidence.

Weights**

  Discbine® 209 Discbine® 210
Operating weight lbs. (kg.) Flail Tine: 3690 (1674)*** / Roll: 3740 (1697)*** Flail Tine: 4100 (1864)*** / Roll: 4160 (1891)***

Tongue Options

  Discbine® 209 Discbine® 210
Type Side-pull, straight tongue Side-pull, curved tongue
Hitch type Drawbar with CV PTO Standard Drawbar with CV PTO, Swivel hitch with drawbar adapter or 2-point hitch

Tractor Requirements

  Discbine® 209 Discbine® 210
Minimum PTO power required hp (kW) 65 (49) 80 (60)
Hydraulic circuits required 2 2
Minimum relief pressure required psi (bar) 1500 (103) 1500 (103)
Drawbar ASAE Category II ASAE Category II
Swivel Hitch - Drawbar — ASAE Category II or III
Swivel Hitch - 2-Point — ASAE Category II, III-N, or III
Electrical 7-pin electrical connector for transport lights 7-pin electrical connector for transport lights

Roll Conditioners

  Discbine® 209 Discbine® 210
Type Chevron intermeshing rubber Chevron intermeshing rubber or steel rolls
Length / Diameter in. (mm) 90 (2286) / 10.4 (264) 102 (2591) / 10.4 (264)
Drive method 4 HB V-belt and enclosed gears 4 HB V-belt and enclosed gears
Speed rpm 647 647
Conditioner roll tension adjustment Single crank Single crank
Conditioner gap adjustment Adjustable drawbolt stop, each end Adjustable drawbolt stop, each end

LeaningEdge Flail Conditioners

  Discbine® 209 Discbine® 210
Type Flail rotor with 90 tapered flails Flail rotor with 100 tapered flails
Length / Diameter in. (mm) 90 (2286) / 22 (560) 102 (2591) / 22 (560)
Drive method 4 HB v-belt 4 HB v-belt
Speed rpm 718 std. 1000 opt. 718 std. 1000 opt.
Conditioner gap adjustment Single crank adjustable rotor hood Single crank adjustable rotor hood

Transport Speed

  Discbine® 209 Discbine® 210
Max road speed mph (kph) 20 (32) 20 (32)

Tires

  Discbine® 209 Discbine® 210
Tubeless ag rib implement tires 9.5L x 14L 6PR Flail Tine: 9.5L x 14L 6PR / Roll: 11L x 15L 6 PR

Crop Discharge

  Discbine® 209 Discbine® 210
Swath width ft. (m) 6 (1.83) 7 (2.13)
Windrow width ft. (m) 3-6 (0.9-1.83) 3-7 (0.9-2.13)

Cutterbar

  Discbine® 209 Discbine® 210
Cutting width ft. in. (m) 9’ 2” (2.8) 10’ 4” (3.16)
Cutterbar model MowMax™ Modular Cutterbar with ShockPRO™ hubs MowMax™ Modular Cutterbar with ShockPRO™ hubs
Number of discs 7 8
Knives per disc 2 2
Disc speed @ 540 rpm PTO speed rpm 3000 3000
Tilt angle degrees 2° - 10° 2° - 10°
Flotation Up & back, adjustable springs Up & back, adjustable springs
Drive method PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height in. (mm) 1.1-2.7 (29-68) Flail Tine: 1.1-2.7 (29-68) or Roll: .95-2.4 (24-60)
Cutting height w/optional high-stubble shoes in. (mm) 2.25-4.5 (58-115) 2.25-4.5 (58-115)
Cutting height w/optional adjustable shoes in. (mm) 2.25-4.5 (58-115) 2.25-4.5 (58-115)

Dimensions*

  Discbine® 209 Discbine® 210
Width, transport ft. in. (m) 9’ 11” (3.02) 11’ 3” (3.42)
Width , operating ft. in. (m) 14’ 10” (4.52) 16’ 0” (4.87) / 17’ 7’’ (5.36), with swivel hitch equipped
Length, transport ft. in. (m) Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)*** Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)***
Length, operating ft. in. (m) Flail Tine: 17’ 8’’ (5.4)*** or Roll: 17’ 2’’ (5.23)*** Flail Tine: 17’ 8’’ (5.4)*** or Roll: 15’ 7’’ (4.75)***
Height ft. in. (m) Transport: 5’ 8” (1.73) / Operating: 4’ 5” (1.35) Transport: 5’ 3” (1.60) / Operating: 4’ 5” (1.35)
Ground clearance with head fully raised in. (mm) 17 (4.32) Flail Tine: 17 (4.32) or Roll: 18 (4.57)

Driveline

  Discbine® 209 Discbine® 210
Input speed rpm 540 540 or 1000 Standard Drawbar Attachment, 540 Only Swivel Hitch Attachment
Driveline protection Slip clutch and overrunning clutch assembly at rear of PTO shaft Slip clutch and overrunning clutch assembly at rear of PTO shaft
Secondary driveline Non-CV driveline Double CV Driveline - Head repositionable under load

Other Similar Models

Compare Similar Models