Dynapac
CC1200C VI

CC1200C VI — DYNAPAC COMBI ROLLERS

The combi-versions are equipped with four rubber tires at the rear instead of a drum. The rubber wheels are driven in pairs by separate propulsion motors, thus minimizing the risk of damaging newly laid asphalt compound when making sharp turns. The rubber wheels ensure a denser and smoother surface on the asphalt, a feature that is sometimes required.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.

Specifications

• Dimensions - Turning radius, outside: 12 ft
• Hydraulic System - Vibration: Gear pump/motors with constant displacement.
• Traction - Vertical oscillation: ±10°
• Traction - Theor. gradeability: 65 %
• Dimensions - Curb clearance: 22 in
• Engine - Manufacturer/Model: Kubota D1703-M (IIIA)
• Alternative Engine - Fuel tank capacity:
• Compaction - Nominal amplitude: 0.020 in
• Compaction - Emulsion tank: 5.28 gal
• Dimensions - Overhang, left: 3 in
• Alternative Engine - Rated power, SAE J1995: 18.5 kW (25 hp ) @ 2,200 rpm
• Dimensions - Turning radius, inside: 8 ft
• Compaction - Wheel load: 598 lbs/wheel
• Dimensions - Width, tire: 9.6 in
• Dimensions - Height, with ROPS: 100 in
• Dimensions - Drum diameter: 28 in
• Compaction - Water tank: 49 gal
• Hydraulic System - Steering: Gear pump with constant displacement.
• Engine - Fuel tank capacity: 12 gal
• Hydraulic System - Parking/Emergency brake: Failsafe multidisc brake on drum and wheels.
• Engine - Type: Water cooled diesel engine
• Hydraulic System - Driving: Axial piston pump with variable displacement. Radial piston motors with constant displacement.
• Alternative Engine - Type: Water cooled diesel engine
• Dimensions - Wheelbase: 67 in
• Masses - Operating mass (incl. ROPS): 5,100 lbs
• Dimensions - Length: 94 in
• Dimensions - Ground clearance: 7 in
• Dimensions - Drum shell thickness: 0.5 in
• Alternative Engine - Manufacturer/Model: Kubota D1703-DI (T4/V)
• Dimensions - Width: 53 in
• Masses - Max. operating mass: 6,800 lbs
• Compaction - Centrifugal force: 7650/6525 lbs
• Compaction - Vibration frequency: 3960/3650 vpm
• Compaction - Static linear load: 58 lbs/in
• Hydraulic System - Service brake: Hydrostatic in forward and reverse lever.
• Alternative Engine - Model: D1803-CR (T4/V)
• Dimensions - Overhang, right: 3 in
• Engine - Rated power, SAE J1995: 26 kW (35.0 hp ) @ 2,800 rpm
• Dimensions - Width, wheel module: 45 in
• Dimensions - Drum width: 47 in
• Dimensions - Width, offset: 2
• Dimensions - Height, w/o ROPS/cab: 69 in
• Traction - Speed range: 0-6 mph
• Dimensions - Steering angle: ±30°
• Masses - Module mass (front/rear): 2,700 lbs/ 2,400 lbs