Dynapac
CC4200C

DYNAPAC CC4200C−COMBI ROLLERS

The combi-versions are equipped with four rubber tyres at the rear instead of a drum. The rubber wheels are driven in pairs by separate propulsion motors, thus minimising the risk of damaging newly laid asphalt compound when making sharp turns. The rubber wheels ensure a denser and smoother surface on the asphalt, a feature that is sometimes required.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.

Specifications

• Hydraulic System - Steering: Gear pump with constant displacement.
• Hydraulic System - Wheelbase: 145 in
• Hydraulic System - Wheel track: 18 in
• Hydraulic System - Width, wheel module: 65 in
• Hydraulic System - Drum diameter: 51 in
• Hydraulic System - Height, with ROPS/cab: 118 in
• Hydraulic System - Vibration: Axial piston pump with variable displacement. Axial piston motor with constant displacement.
• Compaction - Vibration frequency (high/low amplitude): 3,060/4,020 vpm
• Alternative Engine - Fuel tank capacity:
• Engine - Rated power, SAE J1995: 97 kW (130 hp ) @ 2,200 rpm
• Alternative Engine - Type: Water cooled turbo Diesel
• Traction - Theor. gradeability: 39 %
• Masses - Max. operating mass: 22,900 lbs
• Engine - Manufacturer/Model: Cummins QSB 4.5, IIIB/T4i
• Hydraulic System - Steering angle: ±32°
• Compaction - Emulsion tank: 21 gal
• Alternative Engine - Rated power, SAE J1995: 93 kW (125 hp ) @ 2,200 rpm
• Engine - Fuel tank capacity: 63 gal
• Masses - Operating mass (incl. ROPS): 20,900 lbs
• Hydraulic System - Length: 196 in
• Hydraulic System - Width, tire: 11 in
• Masses - Module mass (front/rear): 11,250 lbs/9,650 lbs
• Hydraulic System - Wheel spacing: 6 in
• Traction - Speed range: 0-7.5 mph
• Compaction - Static linear load: 165 lbs/in
• Compaction - Wheel load: 2,420 (pounds/wheel)
• Hydraulic System - Turning radius, outside: 195 in
• Alternative Engine - Manufacturer/Model: Cummins QSB 4.5, IIIA/T3
• Compaction - Nominal amplitude (high/low): 0.031/0.012 in
• Hydraulic System - Service brake: Hydrostatic in forward and reverse lever.
• Hydraulic System - Height, w/o ROPS/cab: 90 in
• Hydraulic System - Parking/Secondary brake: Failsafe multidisc brake in both drums.
• Engine - Type: Water cooled turbo Diesel
• Traction - Max. theoretical gradeability: ±8°
• Hydraulic System - Ground clearance: 12 in
• Hydraulic System - Drum shell thickness: 0.7 in
• Hydraulic System - Width: 74 in
• Hydraulic System - Driving: Axial piston pump with variable displacement. Axial piston motors (3) with variable displacement.
• Compaction - Centrifugal force (high/low amplitude): 31,280/20,700 lb
• Hydraulic System - Drum width: 68 in
• Hydraulic System - Curb clearance: 34 in
• Compaction - Water tank: 238 gal