CA15AD RHINO | Alta Equipment Company

Dynapac
CA15AD RHINO

Single Drum Vibratory Rollers

DYNAPAC CA15AD RHINO–SINGLE DRUM VIBRATORY ROLLERS

The CA15AD is a typical “urban roller” for compacting asphalt compounds in streets, parking lots and industrial facilities, with a high level of finishing and productivity. This version with smooth tires on the rear axle is also intended for paving work in urban areas with steep slopes, where traction capacity is necessary to guarantee a level and attractive surface structure.

FEATURES & BENEFITS

DYN@LINK

A tool to monitor and control their machine fleet efficiently and conveniently.

STANDARD EQUIPMENT

• Back up alarm

• Battery switch (std)

• Brake release

• Cab with AC

• Cup and can holder

• Differential lock (limited slip)

• Drive control (right side)

• Drum drive, ECO mode

• Emergency stop

• Engine 55 kW(Stage IIIA/Tier3)

• Engine hood lockable

• Fuel level display

• High mounted exhaust pipe

• Horn

• Hour meter display

• Hydraulic checkpoints

• Hydraulic fluid filter “spin-on”

• Hydraulic fluid (mineral)

• Interlock, Key (starter)

• Lifting points

• Lifting points for jack

• Manuals (Operation & Maintenance)

• Manuals (Spare parts catalogue)

• Operator’s platform (rubber mounted)

• Operator’s station(fixed)

• Parking brake

• Seat (adjustable)

• Seat belt 2″

• Storage for laminated manuals

• Tie down points

• Vandal cover (instrument panel)

• Warning lights (brake, engine oil pressure, engine oil temperature, Engine diagnostics, low charge, low fuel level)

OPTIONAL EQUIPMENT

• Dyn@link Basic

• ROPS Platform

• Rotating Beacon

• Storage box (on ROPS platform)

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Specifications

  • Dimensions - Steering angle : ±33°
  • Traction - Speed range: 0-10 km/h
  • Dimensions - Overhang, right: 95 mm
  • Masses - Module mass (front/rear): 3400/3000 kg
  • Engine - Manufacturer/Model: Kubota V3307-DI Stage IIIA/Tier 3
  • Masses - Max. operating mass: 6600 kg
  • Engine - Fuel tank capacity: 117 l
  • Dimensions - Ground clearance : 360 mm
  • Dimensions - Turning radius, outside: 4580 mm
  • Hydraulic System - Service brake: Hydrostatic in forward and reverse lever.
  • Dimensions - Drum width : 1680 mm
  • Engine - Type: Water cooled turbo Diesel
  • Dimensions - Height, with ROPS/cab : 2700 mm
  • Engine - Rated power, ISO 14396:
  • Dimensions - Drum diameter: 1220 mm
  • Dimensions - Wheelbase: 2200 mm
  • Traction - Tire size:
  • Hydraulic System - Driving: Hydrostatic with a traction pump supplying two parallel connected motors, one on rear axle and one on drum
  • Dimensions - Turning radius, inside: 2900 mm
  • Dimensions - Curb clearance: 360 mm
  • Hydraulic System - Parking/Emergency brake: Failsafe multidisc brake in rear axle and front drum motor.
  • Compaction - Centrifugal force (high/low amplitude): 96/48 kN
  • Compaction - Water tank volume: 475 L
  • Compaction - Emulsion tank: 13 l
  • Hydraulic System - Steering: Mechanical-hydraulic with steering valve supplying the steering cylinder. Steering angle is proportional to steering wheel
  • Dimensions - Width, rear: 1530 mm
  • Dimensions - Width, front: 1870 mm
  • Compaction - Static linear load: 20.0 kg/cm
  • Masses - Operating mass (incl. Cab): 6400 kg
  • Dimensions - Overhang, left: 95 mm
  • Compaction - Nominal amplitude (high/low): 0.9/0.45 mm
  • Masses - Operating mass (incl. ROPS): 6200 kg
  • Dimensions - Drum shell thickness: 22 mm
  • Compaction - Vibration frequency (high/low amplitude): 41/41 Hz
  • Traction - Max. theoretical gradeability: 56 %
  • Hydraulic System - Vibration: Hydrostatic with a vibration pump supplying a motor connected to the eccentric axle generating the vibrations
  • Engine - Rated power, SAE J1995: 55 kW (75 hp) @ 2,200 rpm
  • Traction - Vertical oscillation: ±9°
  • Dimensions - Length : 4510 mm
  • Dimensions - Height, max.: 2780 mm