DYNAPAC CA15D RHINO–SINGLE DRUM VIBRATORY ROLLERS
Dynapac has a complete range of compaction equipment products, from the very smallest to one of the world’s biggest.
STANDARD EQUIPMENT
• Back up alarm
• Battery switch (std)
• Brake release
• Cup and can holder
• Differential lock (limited slip)
• Drive control (right side)
• Drum drive, ECO mode
• Emergency stop
• Engine 55 kW (Stage IIIA/Tier3)
• Engine hood lockable
• Fuel level display
• High mounted exhaust pipe
• Horn
• Hour meter display
• Hydraulic checkpoints
• Hydraulic fluid filter “spin-on”
• Hydraulic fluid (mineral)
• Interlock, Key (starter)
• Lifting points
• Lifting points for jack
• Manuals (Operation & Maintenance)
• Manuals (Spare parts catalogue)
• Operator’s platform (rubber mounted)
• Operator’s station(fixed)
• Parking brake
• ROPS or cab
• Seat (adjustable)
• Seat belt 3″
• Storage box (on ROPS platform)
• Storage for laminated manuals
• Tie down points
• Vandal cover (instrument panel)
• Warning lights (brake, engine oil pressure, engine oil temperature, Engine diagnostics, low charge, low fuel level)
OPTIONAL EQUIPMENT
• Cab with AC
• seat belt 3″
• front ballast 200 kg
• shell pad kit
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
- Hydraulic System - Parking/Emergency brake: Failsafe multidisc brake in rear axle and front drum motor.
- Dimensions - Steering angle : ±33°
- Dimensions - Width, front: 1870 mm
- Compaction - Nominal amplitude (high/low): 1,7/0,8 mm
- Traction - Speed range: 0-10 km/h
- Dimensions - Turning radius, outside: 4580 mm
- Dimensions - Wheelbase: 2200 mm
- Dimensions - Drum width : 1680 mm
- Engine - Fuel tank capacity: 117 l
- Hydraulic System - Steering: Mechanical-hydraulic with steering valve supplying the steering cylinder. Steering angle is proportional to steering wheel
- Dimensions - Curb clearance: 360 mm
- Compaction - Emulsion tank:
- Masses - Operating mass (incl. Cab): 6500 kg
- Dimensions - Height, max.:
- Masses - Module mass (front/rear): 3400/3100 kg
- Engine - Manufacturer/Model: Kubota V3307-DI Stage IIIA/Tier 3
- Engine - Rated power, SAE J1995: 55 kW (75 hp) @ 2,200 rpm
- Hydraulic System - Vibration: Hydrostatic with a vibration pump supplying a motor connected to the eccentric axle generating the vibrations
- Traction - Vertical oscillation: ±9°
- Dimensions - Ground clearance : 360 mm
- Compaction - Centrifugal force (high/low amplitude): 114/55 kN
- Masses - Max. operating mass: 7200 kg
- Engine - Electrical system: 12 V
- Masses - Operating mass (incl. ROPS):
- Compaction - Water tank volume:
- Dimensions - Overhang, left: 95 mm
- Dimensions - Height, with ROPS/cab :
- Dimensions - Overhang, right: 95 mm
- Traction - Tire size: (16 ply) 400/60-22.5 flotation
- Dimensions - Drum diameter: 1220 mm
- Hydraulic System - Service brake: Hydrostatic in forward and reverse lever.
- Dimensions - Width, rear: 1530 mm
- Hydraulic System - Driving: Hydrostatic with a traction pump supplying two parallel connected motors, one on rear axle and one on drum
- Engine - Rated power, ISO 14396:
- Traction - Max. theoretical gradeability: 56 %
- Dimensions - Turning radius, inside: 2900 mm
- Dimensions - Drum shell thickness: 22 mm
- Compaction - Static linear load: 20 kg/cm
- Engine - Type: Water cooled turbo Diesel
- Dimensions - Length : 4510 mm
- Compaction - Vibration frequency (high/low amplitude): 32/32 Hz