CA15PD RHINO | Alta Equipment Company

DYNAPAC CA15PD RHINO–SINGLE DRUM VIBRATORY ROLLERS

The CA15PD is a vibratory roller designed for compaction operations in pipe trenches, on road shoulders and in cramped spaces in connection with refilling work. The roller is also suitable for repair work on dams, power stations, parking lots and airfields. The smooth drum version with drum drive (D) gives good maneuverability even on very steep slopes.

STANDARD EQUIPMENT

• Back up alarm

• Battery switch (std)

• Brake release

• Cup and can holder

• Differential lock (limited slip)

• Drive control (right side)

• Drum drive, ECO mode

• Emergency stop

• Engine 55 kW (Stage IIIA/Tier3)

• Engine hood lockable

• Fuel level display

• High mounted exhaust pipe

• Horn

• Hour meter display

• Hydraulic checkpoints

• Hydraulic fluid filter “spin-on”

• Hydraulic fluid (mineral)

• Interlock, Key (starter)

• Lifting points

• Lifting points for jack

• Manuals (Operation & Maintenance)

• Manuals (Spare parts catalogue)

• Operator’s platform (rubber mounted)

• Operator’s station(fixed)

• Parking brake

• ROPS or cab

• Seat (adjustable)

• Seat belt 3″

• Storage box (on ROPS platform)

• Storage for laminated manuals

• Tie down points

• Vandal cover (instrument panel)

• Warning lights (brake, engine oil pressure, engine oil temperature, Engine diagnostics, low charge, low fuel level)

OPTIONAL EQUIPMENT

• Cab with AC

• seat belt 3″

• Compaction Meter

• Dyn@link basic

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

  • Compaction - Static linear load: 20.3 kg/cm
  • Compaction - Nominal amplitude (high/low): 1,7/0,8 mm
  • Dimensions - Turning radius, inside: 2900 mm
  • Traction - Max. theoretical gradeability: 56 %
  • Compaction - Centrifugal force (high/low amplitude): 114/55 kN
  • Engine - Rated power, ISO 14396:
  • Dimensions - Steering angle : ±33°
  • Dimensions - Turning radius, outside: 4580 mm
  • Dimensions - Length : 4510 mm
  • Traction - Pad area: 84 cm²
  • Dimensions - Ground clearance : 360 mm
  • Dimensions - Height, with ROPS/cab : 2700 mm
  • Hydraulic System - Parking/Emergency brake: Failsafe multidisc brake in rear axle and front drum motor.
  • Dimensions - Overhang, left: 95 mm
  • Engine - Type: Water cooled turbo Diesel
  • Traction - Vertical oscillation: ±9°
  • Masses - Module mass (front/rear): 3400/3300 kg
  • Compaction - Water tank volume:
  • Hydraulic System - Steering: Mechanical-hydraulic with steering valve supplying the steering cylinder. Steering angle is proportional to steering wheel
  • Dimensions - Height, max.:
  • Hydraulic System - Vibration: Hydrostatic with a vibration pump supplying a motor connected to the eccentric axle generating the vibrations
  • Dimensions - Overhang, right: 95 mm
  • Engine - Rated power, SAE J1995: 55 kW (75 hp) @ 2,200 rpm
  • Masses - Operating mass (incl. Cab): 6700 kg
  • Compaction - Emulsion tank:
  • Dimensions - Width, rear: 1530 mm
  • Engine - Manufacturer/Model: Kubota V3307-DI Stage IIIA/Tier 3
  • Masses - Max. operating mass: 6900 kg
  • Traction - Tire size: (16 ply) 400/60-22.5 flotation
  • Dimensions - Width, front: 1870 mm
  • Masses - Operating mass (incl. ROPS):
  • Engine - Electrical system: 12 V
  • Dimensions - Curb clearance: 360 mm
  • Dimensions - Drum width : 1680 mm
  • Dimensions - Drum shell thickness: 17 mm
  • Compaction - Vibration frequency (high/low amplitude): 32/32 Hz
  • Hydraulic System - Driving: Hydrostatic with a traction pump supplying two parallel connected motors, one on rear axle and one on drum
  • Hydraulic System - Service brake: Hydrostatic in forward and reverse lever.
  • Dimensions - Pad height: 76 mm
  • Traction - Number of pads: 132
  • Dimensions - Drum diameter: 1210 mm
  • Engine - Fuel tank capacity: 117 l
  • Dimensions - Wheelbase: 2200 mm
  • Traction - Speed range: 0-10 km/h