This machine is designed to extrude either a 18″ or 24″ curb and gutter. This machine is built with 2 auger housings next to each other. If you would like to do a 24″ curb and gutter (CFD-1887), the machine is equipped with a 2-8″ auger housings. If you would like to do a 18″ curb and gutter (CFD-1886) the machine is equipped with 1-8” auger housing and 1-6″ auger housing. This machine is the same length as our MC 900, but is 56.25″ in width. This machine requires a graded, compacted base that is at least 56.25″ in width. Either machine comes with vibration and 2 outrigger arms to provide stability. Please note, this machine does not have any capabilities to change the grade. Any imperfection in the grade will result in the curb having the same imperfections.
Specifications
|
MC550 |
MC650 |
MC850 |
MC900 |
|
|
Operating Weight |
668 lb. |
718 lb. |
918 lb. |
959 lb. |
|
Height (Steering handle down) |
38″ |
38″ |
40.5″ |
|
|
Width |
32.25″ |
32.25″ |
32.25″ |
|
|
Length with Form (steering handle up) |
77.5″ |
77.5″ |
91.5″ |
|
|
Wheelbase |
52.75″ |
52.75″ |
71″ |
|
|
Hopper Capacity |
6.1 cubic feet |
6.1 cubic feet |
9.0 cubic feet |
|
|
Standard Tire Configuration |
(9) 8″ dia. x 2″ solid rubber |
(9) 8″ dia. x 2″ solid rubber |
(4) 4.10 x 3.50 pneumatic front + (3) 8″ dia. x 2.5″ solid rubber rear |
|
|
Engines |
13 HP Honda 14 HP Kohler |
20.3 HP Honda |
20.3 HP Honda |
|
|
Engine Starting System |
Recoil |
Electric |
Electric |
Electric |
|
Fuel Capacity |
1.6 gal. |
2.3 gal. |
3.3 gal. |
|
|
Standard Auger Configuration |
(2) cast 6″ dia. x 9″ lg. |
(2) cast 6″ dia. x 9″ lg. |
(3) cast 6″ dia. x 9″ lg. |
|
|
Optional Auger Configurations |
(2) cast 5″ dia. x 9″ lg. (1) welded 8″ dia. x 18″ lg. |
(2) cast 5″ dia. x 9″ lg. (1) welded 8″ dia. x 18″ lg. (1) welded 10″ dia. x 18″ lg. |
(3) cast 5″ dia. x 9″ lg. (3) welded 8″ dia. x 18″ lg. (3) welded 10″ dia. x 18″ lg. |
|
|
Hollow Auger Shaft (to extrude rebar) |
Optional |
Optional |
Not available |
|
|
Drive System |
Automatic centrifugal clutch to enclosed 8:1 gear reducer; final auger drive chain & sprocket Extrusion process provides self-propulsion |
|||
|
Steering |
Tie rod with 40″ steering handle |
|||
|
Brake |
Friction pad on steering handle |
|||
|
OTHER AVAILABLE MODELS: MC655 Same as MC650, but with modified frame allowing extrusion under existing guardrail. MC750 Same as MC650, but with two continuously turning auger assemblies, one mounted on the left and one on the right, allowing immediate changeover from right to left hand extrusion. |
||||