• Height to Hinge Pin – Fully Raised (mm): 120.5″ (3061)
  • Rated Operating Capacity (kg): 1,900 lbs. (862)
  • Gross Power (kW): 69.3 hp (51.7)
    • Capacities/Weights: Fuel Tank: 16.5 gal.
    • Capacities/Weights: Rated Operating Capacity: 1,900 lbs.
    • Capacities/Weights: Travel Speed - Maximum: 7.5 mph
    • Engine: Gross Power @ 2500 rpm: 69.3 hp
    • Dimensions: Ground Clearance to Chassis: 6.5"
    • Dimensions: Height to Hinge Pin - Fully Raised: 120.5"
    • Dimensions: Overall Height to Top of ROPS: 80"
    • Dimensions: Bucket Width: 66"
    • Dimensions: Wheelbase: 42"
    • Dimensions: Rollback at Ground: 26°
    • Dimensions: Rollback at Specified Height: 96°
    • Dimensions: Departure Angle: 25°
    • Dimensions: Clearance Circle - Rear: 58.5"
    • Engine: Model: 4TNV98C-NMS Tier IV/Stage 3B
    • Dimensions: Overall Width: 66.5"/64.5"A
    • Dimensions: Dump Reach - Fully Raised: 22.5"
    • Hydraulic System: Reservoir Capacity (L): 8 gal.
    • Dimensions: Clearance Circle - Front without Bucket: 44.5"
    • Dimensions: Dump Angle: 42°
    • Capacities/Weights: Rated Operating Capacity with Optional Counterweight: 2,110 lbs.
    • Dimensions: Overall Length with Bucket: 127" with 66" Bucket
    • Electrical System: Battery: 12-volt
    • Engine: Maximum Torque: 173 ft.-lbs @ 1625
    • Dimensions: Standard Specification Tire Size: 10.00 x 16.5 HD
    • Engine: Make: Yanmar
    • Dimensions: Dump Height: 91"
    • Dimensions: Overall Operating Height - Fully Raised: 158"
    • Engine: Net Power @ 2500 rpm: 68.4 hp
    • Dimensions: Overall Length without Bucket: 94"
    • Dimensions: Seat to Ground Height: 39"
    • Engine: Displacement: 202.6 cu.in.
    • Capacities/Weights: Travel Speed with Two-Speed Option - Maximum: 12.5 mph
    • Capacities/Weights: Operating Weight - Approximate: 6,880 lbs.
    • Electrical System: Alternator: 95-amp
    • Hydraulic System: Auxiliary Hydraulics - Standard: 18.5 gpm
    • Dimensions: Clearance Circle - Front with Bucket: 79"
    • Hydraulic System: High-Flow Auxiliary Hydraulics - Option (L/min): 31.5 gpm
    • New side-folding restraint bar and adjustable armrests enhance operator safety and comfort.
    • Extra-large side screens combined with Gehl PowerView® low-profile lift arm design provide a wide field-of-view to the side work areas.
    • Gehl PowerView® low-profile boom design offers optimal side-to-side visibility.
    • Between the tire design keeps the machine length short and compact.
    • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
    • Regeneration is intuitively managed through the digital display and a clearly labeled rocker switch.
    • Excellent ease of operation and proportionate flow adjustability are achieved with the auxiliary flow control rocker switch located on the control grip.
    • Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue.
    • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
    • Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time.
    • The DPF requires regeneration to maintain optimal running conditions. This occurs passively as the machine is operated, but also requires occasional manual regeneration by the operator.
    • New upper-left and upper-right instrument panels provide easy readout and switch access.
    • The DPF (Diesel Particulate Filter) system provides clean emissions without the need for additional fuel after-treatment additives.
    • Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot.
    • Drive chains and axle bearings are sealed systems that require no maintenance.
    • Features such as the remote oil drain and filter provide simple and easy maintenance access.
    • Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort.
    • HydraGlide™ option helps keep material in the bucket and provides a smoother ride by allowing the bucket to float when travelling over rough terrain.
    • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
    • Auxiliary controls are located on the control grip in all control configurations for easy access.
    • ROPS/FOPS tilts up with the aid of gas struts for access to hydraulic components.
    • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
    • Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner, quieter, climate controlled operating environment.
    • Improved cycle times increase productivity on the jobsite.
    • Radial lift path offers enhanced performance in excavating, grading and digging below grade applications.
    • Oversized engine hood and rear door opens completely, exposing engine components and daily maintenance points.
    • Impressive breakout forces deliver optimal digging and lifting performance.
    • Large Level II ROPS/FOPS is standard equipment.
    • All high-rotation pins have grease points for ease of maintenance.