New C Series loader backhoes with Tier 4 Final certified engines deliver the power and torque needed so you can dig, load, trench or push faster, while reducing the impact on the environment.
- Backhoe Dimensions - Loading Height, ft/in (mm): 12’ 4” (3768)
- Engine - Peak torque, lb-ft (N-m) @ RPM: 344 (466) @ 1400
- Dimensions - Wheelbase, in (mm): 85.6” (2175)
- Backhoe Dimensions - Reach from swing post, ft/in (mm): 21’ 0” (6409)
- Backhoe Dimensions - Crowd digging force, lbs (kg): 6032 (2736)
- Backhoe Dimensions - Crowd digging force, lbs (kg): 8,520 (3868)
- Backhoe Dimensions - Loading Reach @ max height, ft/in (mm): 5’ 4” (1615)
- Dimensions - Stabilizer spread, operating, ft/in (mm): 10’ 7” (3226)
- Backhoe Dimensions - Max dig depth, ft/in (mm): 18’ 11” (5770)
- Backhoe Dimensions - Max pin height, ft/in (mm): 16’ 4” (4969)
- Transmission - Gear: 4F/4R
- Backhoe Dimensions - Bucket capacity, cu ft (m³): 21’ 8” (6604)
- Engine - Make and model: FPT F5HFL413B*A
- Loader Dimensions - Height to hinge pin, ft/in (mm): 11’ 5” (3481)
- Transmission - Max Fwd travel speed, mph (kph): 22.5 (36.2)
- Backhoe Dimensions - Bucket capacity, cu ft (m³): 18’ 7” (5664)
- Engine - Horsepower, net hp (kW): 108 (81)
- Transmission - Max Fwd travel speed, mph (kph): 22.1 (35.5)
- Backhoe Dimensions - Reach from swing post, ft/in (mm): 17’ 11” (5450)
- Dimensions - Transport height, ft/in (mm): 12’ 6” (3815)
- Weight - Base Unit: 18,525 lbs (8402 kg)
- Backhoe Dimensions - Max dig depth, ft/in (mm): 15’ 6” (4727)
- Dimensions - Transport length, ft/in (mm): 23’ 0” (7030)
- Dimensions - Transport width, ft/in (mm): 7’ 6” (2300)
- Backhoe Dimensions - Loading Height, ft/in (mm): 14’ 6” (4431)
- Transmission - Gear: 4F/3R
- Backhoe Dimensions - Bucket digging force, lbs (kg): 12,969 (5883)
- Loader Dimensions - Reach @ 45 degree dump angle, ft/in (mm): 2’ 4” (706)
- Loader Dimensions - Lift capacity to full height, lbs (kg): 7,833 (3553)
- Backhoe Dimensions - Loading Reach @ max height, ft/in (mm): 7’ 10” (2398)
- Dimensions - Ground Clearance, in (mm): 15.5” (394)
- Loader Dimensions - : 1.1 cu yd Heavy-Duty General Purpose
- Engine - Horsepower, gross, hp (kW): 110 (82)
- Hydraulic System - System relief pressure: 3,045 psi
- Backhoe Dimensions - Max pin height, ft/in (mm): 17’ 7” (5359)
- Hydraulic System - Pump capacity gpm (lpm): 40 (151)
- Engine - Displacement, cu in (l): 207 (3.4)
- Dimensions - Height to top of cab, ft/in (mm): 9’ 5” (2870)
- Loader Dimensions - Bucket breakout force, lbf (daN): 14,253 (6340)
- Superior backhoe design Using the curved boom design of big excavators, the backhoe gives you big digging performance. With in-line cylinders, effort is reduced, visibility is better and the general digging performance is enhanced. Dual swing cylinders provide smooth movement for faster positioning of the arm over the trench and increases the stability of the machine.
- Lower emissions, less fuel New Holland C Series loader backhoes comply with the extremely strict Tier 4 Final regulations, dramatically cutting emissions levels. The SCR (Selective Catalytic Reduction) solution lets the engine run at peak performance for maximum power. It’s simple, too – just top off the DEF (Diesel Exhaust Fluid) when refueling.
- A better view to the trench Ultra-narrow backhoe boom gives you enhanced visibility to the trench, and fully adjustable joystick controls give you ultimate convenience.
- Industry-leading comfort and visibility The spacious six-post cab features floor-to-ceiling windows for outstanding visibility, built-in comfort features to reduce operator fatigue and available pilot controls for added convenience.