GLOBE
50LB1008701
GTBN503-53-24-BR — GLOBE TRAILERS LOWBOY BEAVERTAIL, 50 TON
3 AXLE, DETACHABLE NON GROUND BEARING, MAXIMUM PAYLOAD 100,000 LBS.
All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.
FEATURES & BENEFITS
HIGH QUALITY STEEL
Constructed with T-1 100K PSI yield strength Steel. The High Tensile Steel ensures the designed camber is retained, and allows for a longer product service life.
COLOR OPTIONS
Globe Trailers can powder coat to the color of your choice.
WARRANTY
Globe Trailer’s 10 year structural warranty on all lowboys is the best in the industry. Most competitors offer only a 5 year warranty. This shows how committed Globe Trailers is to its customers.
22” DECK HEIGHT
With a standard deck height of 22”, Globe Trailers have lower overall height, which allows taller loads to be hauled.
HEAVY DUTY OUTRIGGERS
Standard heavy duty outriggers that span the entire height of the side rail allow for maximum force to be applied when in use.
AIR BAGS
30K pound rated large diameter air bags are standard. This allows for lower operating pressure and higher capacity when needed.
COLOR CODED HOSES
Color coded air hoses allow for easy trouble shooting and maintenance.
STEMCO WHEEL WARRANTY
5 year wheel end warranty. Guardian wheel seals, Pro-Torq spindle nuts and Sentinel hub caps.
12” CROSS MEMBER SPACING
Standard 12” stubbed cross member spacing produces added strength to the trailer and also less stress on the decking, leading to a longer life of the decking material.
HYDRAULIC RAMPS
Hydraulic ramp upgrade available for easier use.
STANDARD FRONT RAMPS
Standard Steel Front ramps, for ease of front loading.
MULTI POSITION RIDE HEIGHT
Multi Position Ride Height options. Makes adjustments for various 5th wheel heights easy and allows for larger ground clearance or lower deck height.
DECKING OPTIONS
• Oak: Standard.
• Apitong: Best strength to weight ratios of natural woods.
• Rumber: Composite which is impervious to fluids, mud, oil and UV rays.
CENTRALLY LOCATED FITTINGS
Air, electric and hydraulic (when applicable) fittings are all centrally located at the base of the gooseneck inside a bolster. This makes for quick and easy connect and disconnect. The fittings are protected from possible contact with equipment being loaded or unloaded.
ADDED SECURITY
Globe Trailers air lock with safety bar and spring extended pin ensures that the gooseneck locking pin will remain secured even if air pressure is lost.
BEAVER TAIL
The Beavertail is an angled extension on the rear frame. This makes rear loading more convenient.
LIGHTING SYSTEM
All Lighting is LED and mounted in rubber grommets to DOT standards.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Specifications
- Dimensions - Overall Length: 53'1"
- Dimensions - Ground Clearance: 6"
- Decking/Flooring - Wheel Covers: Steel Covered D-Plate
- Axles, Suspension, & Running Gear - Axle Spacing: 49”
- Hydraulics - 1: Wet Line Kit - Wing Nut Connection
- Axles, Suspension, & Running Gear - Axle 3: Super Lift Type 30 Non-ABS
- Main Deck - Concentrated Load: 100,000 lbs in 12’
- Rear Deck - No. of D-Rings: 4 each side
- Dimensions - Overall Width: 8'6"
- Dimensions - Gooseneck Length: 12'3"
- Main Deck - Side Rails: 16” T-1 Steel Standard
- Electrical - Additional: Safety Night Light Package w/Battery
- Hydraulics - 2: 13 HP Honda-Gas
- Axles, Suspension, & Running Gear - Additional: Auto Dump, Cush Air Ride Adj.
- Main Deck - Main Beam: 16” T-1 Steel Standard
- Gooseneck - Fenders:
- Finish - Flag Holders: Yes
- Rear Deck - Rear Well Style: Boom & Bucket Well
- Decking/Flooring - Well Decking: Removable S-Plate - Full Length
- Dimensions - Trailer Model: GTBN503-53-24-BR
- Rear Deck - Optional Rear Ramps: 36” x 72”
- Gooseneck - Swing Clearance: 102"
- Main Deck - Spacing: 12”
- Rear Deck - Rear Deck Beam: 16.5" T-1 Steel
- Finish - Mud Flaps & Reflective Tape: Yes
- Rear Deck - Optional: Hydraulic, Cleated
- Dimensions - Approximate Weight:
- Main Deck - Crossmembers: 10” & 4”
- Main Deck - No. of D-Rings: 12 each side
- Gooseneck - King Pin Style: Fixed
- Axles, Suspension, & Running Gear - Axle 2: Fixed Type 30/30 ABS
- Axles, Suspension, & Running Gear - Brakes: 16 ½” x 7” - 25K
- Axles, Suspension, & Running Gear - ABS: 2S1M
- Dimensions - Lower Deck Height: 22” loaded
- Main Deck - Outriggers: Full Height Removable
- Dimensions - Rear Deck Height: 42 ⅛"
- Tires & Rims - Rims: 8.25 x 22.5 Hub Piloted Outer Aluminum
- Finish - Sandblast & Powder Coat: Yes
- Decking/Flooring - Main Decking: 1.75” Apitong Full Width
- Main Deck - Front Ramps: Steel, 18” x 31” Standard
- Rear Deck - Optional Beavertail: 36"
- Axles, Suspension, & Running Gear - Axle 1: Fixed Type 30/30 Non-ABS
- Tires & Rims - Tires: 255/70R x 22.5 “H”
- Dimensions - Lower Deck Length: 24'
- Axles, Suspension, & Running Gear - Suspension: Air Ride Suspension - 25K
- Main Deck - Centers: 40"
- Dimensions - Rear Deck Length: 16'10"
- Axles, Suspension, & Running Gear - Axle Capacity: 25,000 lbs
- Rear Deck - Riser: 35° Rear Bridge Ramp
- Electrical - Connector: 7 Way Connector
- Gooseneck - 5th Wheel Height: 50”
- Axles, Suspension, & Running Gear - No. of Axles: 3
- Gooseneck - King Pin Setting: 16”
- Electrical - Lights: LED Plus 2 - Rear Strobes
- Gooseneck - Ride Height: 5-Position
- Gooseneck - King Pin: 2”
