GLOBE TRAILERS HYDRAULIC TAIL, 35 TON — 35HT267284

FEATURES & BENEFITS

HIGH QUALITY STEEL

Constructed with T-1 100K PSI yield strength Steel. The High Tensile Steel ensures the designed camber is retained, and allows for a longer product service life.

HYDRAULIC TAIL

The Hydraulic Tail is a bi-fold that extends to allow easy loading of equipment with a very low load angle. In the transportation mode the flip under ramp folds into the beaver tail for a shorter overall trailer length.

WINCH SYSTEM

Available options for 12,000 to 30,000 lb. hydraulic winch system. Mounted front and center of the upper deck. Standard cable length of 85’ with shackle. Cable length options are available.

HYDRAULIC RAMPS

The Hydraulic Ramps extend to allow easier loading on to the upper deck.

KEY HOLES FOR TIE DOWNS

Double slotted key holes give you more tie-down angles for securing load.

STORAGE COMPARTMENT

Flush mounted compartments to store your loose items.

WHEEL OPTIONS

All Globe trailers come with standard HUB piloted disc wheels. Wheels are also available in all Aluminum or Outer Aluminum.

DROP DECK DESIGN

The drop deck design allows for taller loads.

HEAD RACK

Optional detachable steel bulkhead, 48” high with optional work lights.

DECKING OPTIONS

• Oak: Standard.

• Apitong: Best strength to weight ratios of natural woods.

• Rumber: Composite which is impervious to fluids, mud, oil and UV rays.

STEMCO WHEEL WARRANTY

5-year wheel end warranty. Guardian wheel seals, Pro-Torq spindle nuts and Sentinel hub caps.

LANDING GEAR

2 speed Landing Gear, allows for 160,000 lbs. static load.

WINCH CONTROLS

Controls Located on the driver side of the neck.

COLOR CODED HOSES

Color coded air hoses allow for easy trouble shooting and maintenance.

COLOR OPTIONS

Globe Trailers can powder coat to the color of your choice.

POWDER COATED

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.