GLOBE
125SD085635

125SD085635 — DROP DECK 125 TON

FEATURES & BENEFITS

HIGH QUALITY STEEL

Side rails and main beams constructed of 100,000 psi yield strength steel allowing for longer life. The high tensile steel ensures the designed camber is retained.

LANDING GEAR

2 speed Landing Gear, allows for 160,000 lbs. static load.

COLOR OPTIONS

Globe Trailers can powder coat to the color of your choice.

WHEEL OPTIONS

All Globe trailers come with standard HUB piloted disc wheels. Wheels are also available in all Aluminum or Outer Aluminum.

SUSPENSION STRENGTH

Low weight optimized durability, dual rate bushings with shear away pivot bolt that ensure a proper torque of 550 ft-lbs.

OFF ROAD TIRES

Special thread compound for enhanced resistance to cuts, chips, and tears. A wider foot print for extra traction and stability.

DECKING OPTIONS

Oak: Standard.

Apitong: Best strength to weight ratios of natural woods.

Rumber: Composite which is impervious to fluids, mud, oil and UV rays.

STEMCO WHEEL WARRANTY

5-year wheel end warranty. Guardian wheel seals, Pro-Torq spindle nuts and Sentinel hub caps.

COLOR CODED HOSES

Color coded air hoses allow for easy trouble shooting and maintenance.

LIGHTING SYSTEM

All Lighting is LED and mounted in rubber grommets to DOT standards.

12” CROSS MEMBER SPACING

Standard 12” stubbed cross member spacing produces added strength to the trailer and also less stress on the decking, leading to a longer life of the decking material.

POWDER COATED

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

FINISH

• Sandblast & Powder Coat

• Mud Flaps & Reflective Tape

• Flag Holders

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Specifications

• ELECTRICAL SYSTEM - Connector: 7 Way Connector
• AXLES, SUSPENSION, & RUNNING GEAR - Brakes: 16 ½” x 7” – 30K
• REAR RAMP OPTIONS - Additional:
• SPECIFICATIONS - Trailer Model: GTFV1258-82-43
• SPECIFICATIONS - Overall Length: 82’ (981 ½”)
• MAIN DECK - Crossmembers: 14” & 10”
• MAIN DECK - Outriggers:
• MAIN DECK - Side Rails: 24 1/2” T1 Steel
• MAIN DECK - # of Outriggers:
• MAIN DECK - Front Ramps:
• AXLES, SUSPENSION, & RUNNING GEAR - :
• AXLES, SUSPENSION, & RUNNING GEAR - Axle Track:
• GOOSENECK - 5th Wheel Height: 62 1/2”
• MAIN DECK - Spacing: 26”
• MAIN DECK - # of D-Rings: 15 each side
• SPECIFICATIONS - Gooseneck Length: 23’ 9” (285””)
• TIRES & RIMS - Rims: 8.25 x 22.5 Hub Piloted Steel
• SPECIFICATIONS - Overall Width: 14’ (168”)
• ELECTRICAL SYSTEM - Lights: LED Plus 2 - Rear Strobes
• AXLES, SUSPENSION, & RUNNING GEAR - ABS: 4S2M
• SPECIFICATIONS - Ground Clearance: 39”
• GOOSENECK - Swing Clearance: 205.5”
• LANDING GEAR - :
• AXLES, SUSPENSION, & RUNNING GEAR - Axles : Fixed Type 30/30 ABS
• AXLES, SUSPENSION, & RUNNING GEAR - Suspension: Single Point Walking Beam Suspension
• AXLES, SUSPENSION, & RUNNING GEAR - # of Axles: 8
• GOOSENECK - King Pin Setting: 19”
• DECKING/FLOORING - Main Decking: 2 3/8” (Apitong, Open Center)
• MAIN DECK - Main Beam: 24 1/2” T1 Stee
• SPECIFICATIONS - Weight, Apx. : 64,000 ± lbs
• MAIN DECK - Centers: 86” Standard
• AXLES, SUSPENSION, & RUNNING GEAR - Axle Capacity: 25K
• GOOSENECK - King Pin Style: Removable
• GOOSENECK - King Pin: 2” & 3.5” Double Ended
• REAR RAMP OPTIONS - Rear Ramps: 62” x 123” | Cleated | Hydraulically operated
• DECKING/FLOORING - Wheel Covers: Closed
• AXLES, SUSPENSION, & RUNNING GEAR - Axle Spacing: 54 1/2” | 53 1/2” | 54 1/2”
• REAR RAMP OPTIONS - Beavertail: 55” @ 15°
• DECKING/FLOORING - :
• SPECIFICATIONS - Lower Deck Length: 43’ 6” (522”)
• SPECIFICATIONS - Rear Deck Height:
• LANDING GEAR - Additional: Standard JOST landing leg
• TIRES & RIMS - Tires: 275/70R X 22.5 H
• SPECIFICATIONS - Lower Deck Height: 64”
• SPECIFICATIONS - Maximum Payload:
• SPECIFICATIONS - Rear Deck Length: