50DP487342 — DROP DECK 50 TON
FEATURES & BENEFITS
HIGH QUALITY STEEL
Constructed with T-1 100K PSI yield strength Steel. The High Tensile Steel ensures the designed camber is retained, and allows for a longer product service life.
STEMCO WHEEL WARRANTY
5-year wheel end warranty. Guardian wheel seals, Pro-Torq spindle nuts and Sentinel hub caps.
COLOR OPTIONS
Globe Trailers can powder coat to the color of your choice.
HYDRAULIC RAMPS
Hydraulic ramp upgrade available for easier use.
AIR BAGS
30K pound rated large diameter air bags are standard. This allows for lower operating pressure and higher capacity when needed.
STANDARD OUTRIGGERS
Equipped with outriggers to help support the extra wide loads.
SELF CONTAINED HYDRAULIC SYSTEM
Rear Side – Inside and protected, system stores the pump, tank, and battery to run the hydraulic ramps.
TOOL BOX
Tool box located in the front section of the upper deck.
WHEEL OPTIONS
All Globe trailers come with standard HUB piloted disc wheels. Wheels are also available in all Aluminum or Outer Aluminum.
LIGHTING SYSTEM
All Lighting is LED and mounted in rubber grommets to DOT standards.
DECKING OPTIONS
• Oak: Standard
• Apitong: Best strength to weight ratios of natural woods.
• Rumber: Composite which is impervious to fluids, mud, oil and UV rays.
COLOR CODED HOSES
Color coded air hoses allow for easy trouble shooting and maintenance.
LANDING GEAR
2 speed Landing Gear, allows for 160,000 lbs. static load.
POLYURETHANE VS RUBBER BUSHING
• Reduced Maintenance – Increased Maintenance
• Increased Trailer Lifetime – Needs Replacement
• Increased Trailer Performance – Reduces Trailer Performance
• Weather Resistant – Damaged from Weather
POWDER COATED
All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.
FINISH
• Sandblast & Powder Coat
• Mud Flaps & Reflective Tape
• Flag Holders
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
- DECKING/FLOORING - Wheel Covers: Steel
- AXLES, SUSPENSION, & RUNNING GEAR - Brakes: 12.25” x 7.5”
- MAIN DECK - Centers: 40” Standard
- GOOSENECK - 5th Wheel Height: 52”
- AXLES, SUSPENSION, & RUNNING GEAR - Suspension: Air Ride Suspension
- MAIN DECK - Side Rails: Fabricated I-Beam
- SPECIFICATIONS - Overall Length: 53’
- AXLES, SUSPENSION, & RUNNING GEAR - Landing Gear: 2-Speed
- MAIN DECK - D-Rings: 16 Per Side
- TIRES & RIMS - Rims: 6.75 x 17.5 8 hole-hub piloted steel disc wheels
- MAIN DECK - Crossmembers: 10” & 4”
- AXLES, SUSPENSION, & RUNNING GEAR - Axle 1: Fixed Type 30/30 ABS
- SPECIFICATIONS - Lower Deck Height: 35”
- SPECIFICATIONS - Weight, Apx. : 20,210 ± lbs.
- SPECIFICATIONS - Trailer Model: GTFV503-53-28
- GOOSENECK - Swing Clearance: 128”
- BEAVERTAIL & RAMPS - Rear Ramps: 84” x 36” | Hydraulic | Wood Covered
- MAIN DECK - Main Beam: Fabricated I-Beam
- AXLES, SUSPENSION, & RUNNING GEAR - # of Axles: 3
- SPECIFICATIONS - Gooseneck Length: 10’
- GOOSENECK - King Pin Setting: 18”
- BEAVERTAIL & RAMPS - Beavertail: 40”
- AXLES, SUSPENSION, & RUNNING GEAR - ABS: 4S2M
- SPECIFICATIONS - Overall Width: 8’ 6”
- MAIN DECK - Outriggers: 12 Per Side
- SPECIFICATIONS - Maximum Payload: 100,000 lbs.
- DECKING/FLOORING - Main Decking: 2” Apitong Flooring
- GOOSENECK - King Pin Style: Fixed
- AXLES, SUSPENSION, & RUNNING GEAR - Axle 3: Lift Axle 30/30 NON ABS
- GOOSENECK - King Pin: 2” Heavy Duty
- ELECTRICAL - Lights: LED Plus 2 - Rear Strobes
- AXLES, SUSPENSION, & RUNNING GEAR - Axle Spacing: 50”
- TIRES & RIMS - Tires: 235/75R x 17.5 “H”
- MAIN DECK - Spacing: 12”
- SPECIFICATIONS - Load Well Length: 20’ 6”
- AXLES, SUSPENSION, & RUNNING GEAR - Axle 2: Fixed Type 30/30 ABS
- ELECTRICAL - Connector: 7 Way SAE Connector
- AXLES, SUSPENSION, & RUNNING GEAR - Axle Capacity: 25,000 lbs.