TW80 | Alta Equipment Company

TAKEUCHI TW80 SERIES 3 — WHEEL LOADER

 

The TW80 Series 3 features a compact design that is ideal for maneuvering in tight spaces with minimal damage to lawns and other sensitive surfaces. Delivering 73 horsepower, the TW80 Series 3 is equipped with a powerful, turbocharged Deutz engine that is EPA Final Tier 4 compliant. The loader has excellent reach, dump height, and lifting capabilities making it suitable for a wide variety of applications, and the standard hydraulic coupler simplifies attachment exchanges. The operator’s station is elevated and unobstructed for greater visibility and better job site awareness. Excellent power, precise control, lower operational and maintenance costs result in increased productivity and minimal downtime.

 

FEATURES

ENGINE

• U.S. EPA Final Tier 4

• DOC Exhaust After Treatment

• Turbocharged

• Water Cooled

• Dual Element Air Cleaner

• High Capacity Radiator

 

ELECTRICAL

• Multi-Informational Monitor

• 12 volt System with 95 amp Alternator

• Work Lights: Front and Rear

• Driving Lights and Turn Signals

• Directional Lights: Fwd / Rev

• Engine Preheat

• Back-up Alarm

 

DRIVE TRAIN

• Hydrostatic Drive with 100% Inching Pedal

• 100% Locking Differentials: Front and Rear

• Outboard Planetary Drives

• 2 Speed Travel

• Spring Applied Parking Brake

• Multi-Wet Disc Brake

• High Speed Travel 17.4 mph (28.0 km/h) (optional)

• Rigid Axles with Outboard Planetary Reduction

• 15-19.5 Heavy Duty Construction Tire Assembly (optional)

• High Speed Road Gear with Ride Control (24.8 mph) (optional)

 

HYDRAULIC & WORKING EQUIPMENT

• Pilot Control

• Proportional Thumb Wheel for Coupler or Auxiliary Hydraulic Circuit

• Auxiliary Hydraulic Lines Plumbed to End of Loader Arms

• Auxiliary Hydraulic Detent

• Hydraulic Oil Level Sight Gauge

• High Capacity Hydraulic Oil Cooler

• Z-Bar Linkage

• Bucket Float Function

• Mechanical Bucket Positioning

• Heavy Duty Hydraulic Bucket Quick Coupler

• Heavy Duty Self Aligning Loader Bushings with Oversized Pins

• 81.5″ General Purpose Bucket (1.3 yds) (optional)

• Bolt-on Reversible Cutting Edge for 81.5″ Bucket (optional)

• High Flow Auxiliary Hydraulics (26.0 gpm) (optional)

• Combo Hitch to Universal SSL Adapter (optional)

• Flat Face Hydraulic Coupler Kit (optional)

 

OPERATOR’S STATION

• Enclosed Cab with Air Conditioning, Heat, Front and Rear Wipers, Front and Rear Washers, and Rear Defrost

• Elevated Operator’s Station

• ROPS / FOPS Protection

• Deluxe Air Suspension Seat with Arm Rests

• Multi-Functional Joystick for Machine Direction (FWD/REV) and Loader Controls

• Large Steps and Grab Handles

• 2″ Retractable Seat Belt

• 3″ Retractable Seat Belt (optional)

 

FOUR PILLARS OF TAKEUCHI EQUIPMENT

The Takeuchi design philosophy is centered on Four Pillars: Performance, Durability, Operator Comfort, and Serviceability. The engineering focus of Takeuchi is to build machine to the highest standards of quality and performance. Takeuchi strives to build equipment that incorporates solutions into each and every component and feature.

 

PERFORMANCE

The Takeuchi full product line up is rugged, dependable and productive. Takeuchi equipment provides exceptional value, demonstrates outstanding performance, and measured by their longevity in the field. flotation.

 

DURABILITY

Durability is a cornerstone to the success of our Takeuchi equipment. Takeuchi manufactures equipment that provides less downtime and high resale values. Attention to detail along with quality parts is why Takeuchi has a reputation for providing highly reliable products.

 

OPERATOR COMFORT

Takeuchi builds equipment with the operator in mind. Takeuchi believes that large roomy cabs with an intuitive layout with placement of monitors, switches and controls are essential in providing the highest quality of comfort while operating equipment.

 

SERVICEABILITY

Each Takeuchi is designed to simplify service access reducing downtime and saving you valuable time and money. Every Takeuchi comes standard with a 2 year / 2,000 hour full machine warranty providing additional value and peace of mind.

 

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

  • Machine Dimensions - Turning Radius at Bucket Edge: 14 ft 8.0 in (4,478 mm)
  • Fluid Capacities - Rear Axle Lubrication: 5.4 qt (5.1 L)
  • Fluid Capacities - Front Axle Lubrication: 5.7 qt (5.4 L)
  • Engine - Engine Displacement: 176 cu in (2.9 L)
  • Machine Dimensions - Overall Height: 8 ft 11.5 in (2,730 mm)
  • Machine Dimensions - Dump Angle: 45°
  • Machine Dimensions - Max. Reach Fully Raised: 2 ft 5.0 in (740 mm)
  • Hydraulic System - Auxiliary Flow- Optional Circuit: 26.0 gpm (98.0 Lpm)
  • Machine Dimensions - Overall Operating Height: 13 ft 10.0 in (4,220 mm)
  • Fluid Capacities - Engine Lubrication: 8.5 qt (8.0 L)
  • Hydraulic System - Auxiliary Flow - Primary Circuit: 16.4 gpm (62.0 Lpm)
  • Operating Performance - NOTE: *Rate Operating Capacity (ROC) for wheel loaders is rated with a bucketaccording to SAE J818 at no more than 50% of the full turn tipping load.
  • Operating Performance - Operating Capacity: SAE J818*: 4,301 lb (1,951 kg)
  • Hydraulic System - System Operating Pressure:
  • Operating Performance - Travel Speed - Low Range: 4.0 mph (6.5 km/hr)
  • Engine - Horsepower @ 2,200 rpm: 73.0 hp (54.0 kW)
  • Machine Dimensions - Inside Turning Radius: 6 ft 3.0 in (1,898 mm)
  • Engine - Maximum Torque:
  • Operating Performance - Tipping Load, Full Turn: 8,602 lb (3,902 kg)
  • Machine Dimensions - Recommended Bucket Width: 81.5 in (2,070 mm)
  • Machine Dimensions - Ground Clearance: 1 ft 6.5 in (470 mm)
  • Fluid Capacities - Cooling System: 13.7 qt (13.0 L)
  • Fluid Capacities - Hydraulic Reservoir Capacity: 22.2 gal (84.0 L)
  • Operating Performance - Optional High Speed Travel: 24.8 mph (40.0 km/hr)
  • Fluid Capacities - Fuel Consumption (65% of Full Load): 2.6 gal/hr (10.0 L/hr)
  • Operating Performance - Lift Arm Breakout Force: 12,387 lb (5,618 kg)
  • Machine Dimensions - Rollback Angle: 48°
  • Machine Dimensions - Max. Lift Height to Bucket Pin: 11 ft 1.0 in (3,380 mm)
  • Machine Dimensions - Wheel Base: 7 ft 2.6 in (2,200 mm)
  • Engine - Horsepower:
  • Operating Performance - Bucket Breakout Force: 13,960 lb (6,333 kg)
  • Machine Dimensions - Bucket Clearance Height: 9 ft 11.0 in (3,025 mm)
  • Machine Dimensions - Overall Width without Bucket: 6 ft 9.0 in (2,050 mm)
  • Operating Performance - Travel Speed - High Range: 12.4 mph (20.0 km/hr)
  • ropstype: Enclosed
  • Hydraulic System - Auxiliary Flow - Standard Flow:
  • Fluid Capacities - Planetary Capacity (each):
  • Hydraulic System - Hydraulic System Pressure: 3,335 psi (23.0 MPa)
  • Engine - Emission Standard:
  • Operating Performance - Tipping Load, Straight: 9,742 lb (4,419 kg)
  • Fluid Capacities - Fuel Tank Capacity: 26.4 gal (100.0 L)
  • Operating Performance - Operating Weight - Canopy:
  • Hydraulic System - Auxiliary Flow - Optional High Flow:
  • Engine - Make/Model: Deutz / TD2.9L Turbo
  • Machine Dimensions - Outside Turning Radius: 13 ft 3.0 in (4,046 mm)
  • Machine Dimensions - Dump Height Fully Raised: 8 ft 6.0 in (2,605 mm)
  • Machine Dimensions - Overall Length with Bucket: 18 ft 3.0 in (5,580 mm)
  • Operating Performance - Operating Weight - Cab: 12,700 lb (5,760 kg)
  • Operating Performance - Traction Force: 12,049 lb (5,466 kg)
  • Engine - Maximum Torque @ 1,800 rpm: 192.0 ft-lb (260.0 Nm)