GLOBE TRAILERS HYDRAULIC TAIL, 40 TON — 40HT150713
FEATURES & BENEFITS
HIGH QUALITY STEEL
Constructed of high-quality steel allowing for longer trailer life and greater durability. Main beams constructed using 14” steel beams.
HYDRAULIC TAIL
The Hydraulic Tail is a bi-fold that extends to allow easy loading of equipment with a very low load angle. In the transportation mode the flip under ramp folds into the beaver tail for a shorter overall trailer length.
COLOR OPTIONS
Globe Trailers can powder coat to the color of your choice.
HYDRAULIC RAMPS
The Hydraulic Ramps extend to allow easier loading on to the upper deck.
KEY HOLES FOR THE TIE DOWNS
Double slotted key holes gives you more tie-down angles for securing load.
STORAGE COMPARTMENT
Flush mounted compartments to store your loose items.
LANDING GEAR
2 speed Landing Gear, allows for 160,000 lbs static load.
WHEEL OPTIONS
All Globe trailers come with standard HUB piloted disc wheels. Wheels are also available in all Aluminum or Outer Aluminum.
LIGHTING SYSTEM
All Lighting is LED and mounted in rubber grommets to DOT standards.
WINCH CONTROLS
Controls Located on the driver side of the neck.
HEAD RACK
Optional detachable steel bulkhead, 48” high with optional work lights.
DECKING OPTIONS
• Oak: Standard
• Apitong: Best strength to weight ratios of natural woods.
• Rumber: Composite which is impervious to fluids, mud, oil and UV rays.
WINCH SYSTEM
Available options for 12,000 to 30,000 lb. hydraulic winch system. Mounted front and center of the upper deck. Standard cable length of 85’ with shackle. Cable length options are available.
STEMCO WHEEL WARRANTY
5-year wheel end warranty. Guardian wheel seals, Pro-Torq spindle nuts and Sentinel hub caps.
COLOR CODED HOSES
Color coded air hoses allow for easy trouble shooting and maintenance.
PONY MOTOR
Gasoline 10, 11 or 13 Horse Power Pony provides the hydraulic operation of the tail. Self-contained under the neck.
POWDER COATED
All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
- Main Deck - Crossmembers: 10” on loadwell & 4” on neck & rear deck
- Finish - Sandblast & Powder Coat:
- Main Deck - Maximum Payload:
- Axles, Suspension, & Running Gear - Brakes: 12 1/4 x 7 1/2
- Axles, Suspension, & Running Gear - Suspension: Air ride
- Hydraulics - 27 HP Honda engine:
- Axles, Suspension, & Running Gear - Auto Dump:
- Gooseneck - King Pin: 2” Fixed
- Gooseneck - King Pin Style: Fixed
- Axles, Suspension, & Running Gear - ABS: 4S2M
- Specifications - Load Well Length: 31’
- Axles, Suspension, & Running Gear - Axle Track:
- Hydraulics - Wet-line setup for tractor:
- Main Deck - Main Beam: 20” fabricated I-Beam
- Tires & Rims - Rims: 6.75 x 17.5 Hub piloted steel disc wheels
- Finish - Mud Flaps & Reflective Tape:
- Decking/Flooring - :
- Gooseneck - King Pin Setting: 16”
- Specifications - Swing Clearance: 86”
- Electrical - Connector: 7 Way SAE Connector
- Axles, Suspension, & Running Gear - Axle 2: Fixed Type 30/30 Non-ABS
- Axles, Suspension, & Running Gear - Axle Spacing: 49”
- Specifications - Load Well Height: 36” LOADED
- Specifications - Overall Length: 48’
- Finish - Flag Holders:
- Specifications - Overall Width: 8’ 6”
- Axles, Suspension, & Running Gear - Axle 1: Fixed Type 30/30 Non-ABS
- Specifications - Weight, Apx.: 20,850 ± lbs
- Main Deck - Spacing: 12”
- Gooseneck - Swing Clearance: 86”
- Electrical - Lights: LED Plus 2 - Rear Strobes
- Main Deck - # of D-Rings: 11 per side
- Decking/Flooring - Main Decking: 1.375” Apitong flooring
- Tires & Rims - Tires: 235/75R x 17.5 “H”
- Axles, Suspension, & Running Gear - # of Axles: 2
- Specifications - Hydraulic Tail: 8’
- Specifications - 5th Wheel Height: 49”
- Gooseneck - 5th Wheel Height: 49”
- Specifications - Flip Under Ramp: 4’
- Axles, Suspension, & Running Gear - Axle Capacity: 25,000 lbs.
- Specifications - Trailer Model: GTFH402-52-31
- Specifications - Gooseneck Length: 9’