DYNAPAC CC4200C−COMBI ROLLERS
The combi-versions are equipped with four rubber tyres at the rear instead of a drum. The rubber wheels are driven in pairs by separate propulsion motors, thus minimising the risk of damaging newly laid asphalt compound when making sharp turns. The rubber wheels ensure a denser and smoother surface on the asphalt, a feature that is sometimes required.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
- Hydraulic System - Steering: Gear pump with constant displacement.
- Hydraulic System - Wheelbase: 145 in
- Hydraulic System - Wheel track: 18 in
- Hydraulic System - Width, wheel module: 65 in
- Hydraulic System - Drum diameter: 51 in
- Hydraulic System - Height, with ROPS/cab: 118 in
- Hydraulic System - Vibration: Axial piston pump with variable displacement. Axial piston motor with constant displacement.
- Compaction - Vibration frequency (high/low amplitude): 3,060/4,020 vpm
- Alternative Engine - Fuel tank capacity:
- Engine - Rated power, SAE J1995: 97 kW (130 hp ) @ 2,200 rpm
- Alternative Engine - Type: Water cooled turbo Diesel
- Traction - Theor. gradeability: 39 %
- Masses - Max. operating mass: 22,900 lbs
- Engine - Manufacturer/Model: Cummins QSB 4.5, IIIB/T4i
- Hydraulic System - Steering angle: ±32°
- Compaction - Emulsion tank: 21 gal
- Alternative Engine - Rated power, SAE J1995: 93 kW (125 hp ) @ 2,200 rpm
- Engine - Fuel tank capacity: 63 gal
- Masses - Operating mass (incl. ROPS): 20,900 lbs
- Hydraulic System - Length: 196 in
- Hydraulic System - Width, tire: 11 in
- Masses - Module mass (front/rear): 11,250 lbs/9,650 lbs
- Hydraulic System - Wheel spacing: 6 in
- Traction - Speed range: 0-7.5 mph
- Compaction - Static linear load: 165 lbs/in
- Compaction - Wheel load: 2,420 (pounds/wheel)
- Hydraulic System - Turning radius, outside: 195 in
- Alternative Engine - Manufacturer/Model: Cummins QSB 4.5, IIIA/T3
- Compaction - Nominal amplitude (high/low): 0.031/0.012 in
- Hydraulic System - Service brake: Hydrostatic in forward and reverse lever.
- Hydraulic System - Height, w/o ROPS/cab: 90 in
- Hydraulic System - Parking/Secondary brake: Failsafe multidisc brake in both drums.
- Engine - Type: Water cooled turbo Diesel
- Traction - Max. theoretical gradeability: ±8°
- Hydraulic System - Ground clearance: 12 in
- Hydraulic System - Drum shell thickness: 0.7 in
- Hydraulic System - Width: 74 in
- Hydraulic System - Driving: Axial piston pump with variable displacement. Axial piston motors (3) with variable displacement.
- Compaction - Centrifugal force (high/low amplitude): 31,280/20,700 lb
- Hydraulic System - Drum width: 68 in
- Hydraulic System - Curb clearance: 34 in
- Compaction - Water tank: 238 gal